Windows 10: Continuous usb connection issues with Windows 11

We have a program in place that monitors updates status on all of our computers. Seems like every week, after updates we have usb connected usb fujitsu scanners that can no longer connect. I made sure the scanners are running the most recent driver. I go in and check all connections in device manager and turn off "allow this computer to turn off this device to save power" under properties-power management. Have also turned off link state power management and so on...... The problem goes away until the next week when we run updates. Is there another way of preventing this issue from happening?

:)

 

USB modem connectivity issues

Hello Jay,

Thank you for keeping us posted. We appreciate your patience on this issue.

Now before proceeding any further, I would like to confirm a couple of things.

• Did you check if an updated software for the USB dongle is available?
• Are you referring to connectivity or the browsing experience which lags?
• Did you check if similar issues occur when you connect the USB dongle to another computer?
• Did you check if disabling network resource hungry background applications/utilities helps?

As an initial recommendation, I suggest you to follow these steps to run the Windows in built troubleshooter and check if it helps to identify the issue or even possibly fix it.

a) Write Troubleshooting in the search box and hit enter.

b) Click on Troubleshooting
tab.

c) Click on view all option on the upper left corner.

d) Select the Internet Connection option from the list.

e) Click Next to run the Troubleshooter.

Write to us with the updated information, for us to be able to assist you further.

Thank you.

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk

 

The drive is connected with USB but will not Initialize on Windows 10

Hello Moksha,

As you are facing issues with accessing the USB drive on your device, we will help you with this issue.

Provide us additional information to assist you better with this issue:

• What is the complete error message/ error code of this issue?
• Have you made any changes to the operating system prior to this issue?
• Does this issue confined to the specific drive?

Try few of the below workarounds to identify the cause for the issue:

• Connect the USB drive to different ports and check if it is working fine. This will let us know if the issue is with the port.
• Connect the USB drive to different computer with different ports to check if the issue persists with the drive or the computer.

Let us try the below troubleshooting steps and check if it helps.

Step 1: I suggest you to run Hardware and Devices troubleshooter.Hardware and Devices troubleshooter
checks for common problems and makes sure that any new device or hardware connected to your PC is installed correctly.

• Press Windows key from the keyboard, type
  Troubleshooting and select it.
• Click on view all option on the upper left corner of
  Troubleshooting window.
• Select the Hardware and Device options from the list.
  
• Click Next to run the Hardware and Device Troubleshooter.

Step 2: I recommend you to install all the pending updates from Windows Updates on your device and check if you are able to access the USB drive.

Steps:

• Connect to the internet.
• Press Windows key and type updates.
• Click on Check for updates.
• Under Windows Updates, click on Check for updates.
• Try to install the updates being shown.

Hope it helps. Try the above and update us the status of this issue with the required information, we will be happy to help you further.

Thank you.