Windows 10: cpu issue(s)

I am trying to chase down a cpu issue(s). Every time i do something that stresses the cpu; the cpu tends to heat up to the warning threshold. I just recently applied to thermal paste to the cpu heat sink and to the cpu cover. Please help me here as normally i can fix things pretty well myself but this one has me stumped. And I dont have the funds to go out and get a new processor which would mean i also have to change out my board to a newer one and i definitely dont have the funds for that either. Thanks matt

:)

 

Advice: faulty N82 replacement with N82 or N85?

The speed of the N85's CPU is slightly faster but it only has a single CPU compared to the N82's dual CPU. Overall the N82 is the faster phone of the two.
Message Edited by psychomania on 17-Apr-2009 12:09 PM

 

Windows 10 High Dpc Latency

_________________________________________________________________________________________________________

CONCLUSION

_________________________________________________________________________________________________________

Your system appears to be suitable for handling real-time audio and other tasks without dropouts.

LatencyMon has been analyzing your system for 0:00:34 (h:mm:ss) on all processors.

_________________________________________________________________________________________________________

SYSTEM INFORMATION

_________________________________________________________________________________________________________

Computer name: TOXIFY

OS version: Windows 8 , 6.2, build: 9200 (x64)

Hardware: All Series, ASUS, ASUSTeK COMPUTER INC., MAXIMUS VII HERO

CPU: GenuineIntel Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz

Logical processors: 8

Processor groups: 1

RAM: 16325 MB total

_________________________________________________________________________________________________________

CPU SPEED

_________________________________________________________________________________________________________

Reported CPU speed: 40 MHz

Measured CPU speed: 17 MHz (approx.)

Note: reported execution times may be calculated based on a fixed reported CPU speed. Disable variable speed settings like Intel Speed Step and AMD Cool N Quiet in the BIOS setup for more accurate results.

WARNING: the CPU speed that was measured is only a fraction of the CPU speed reported. Your CPUs may be throttled back due to variable speed settings and thermal issues. It is suggested that you run a utility which reports your actual CPU frequency and temperature.

_________________________________________________________________________________________________________

MEASURED INTERRUPT TO USER PROCESS LATENCIES

_________________________________________________________________________________________________________

The interrupt to process latency reflects the measured interval that a usermode process needed to respond to a hardware request from the moment the interrupt service routine started execution. This includes the scheduling and execution of a DPC routine, the
signaling of an event and the waking up of a usermode thread from an idle wait state in response to that event.

Highest measured interrupt to process latency (µs): 476.527045

Average measured interrupt to process latency (µs): 22.071483

Highest measured interrupt to DPC latency (µs): 453.130216

Average measured interrupt to DPC latency (µs): 10.219612

_________________________________________________________________________________________________________

REPORTED ISRs

_________________________________________________________________________________________________________

Interrupt service routines are routines installed by the OS and device drivers that execute in response to a hardware interrupt signal.

Highest ISR routine execution time (µs): 95.002250

Driver with highest ISR routine execution time: dxgkrnl.sys - DirectX Graphics Kernel, Microsoft Corporation

Highest reported total ISR routine time (%): 0.088418

Driver with highest ISR total time: dxgkrnl.sys - DirectX Graphics Kernel, Microsoft Corporation

Total time spent in ISRs (%) 0.091639

ISR count (execution time <250 µs): 18208

ISR count (execution time 250-500 µs): 0

ISR count (execution time 500-999 µs): 0

ISR count (execution time 1000-1999 µs): 0

ISR count (execution time 2000-3999 µs): 0

ISR count (execution time >=4000 µs): 0

_________________________________________________________________________________________________________

REPORTED DPCs

_________________________________________________________________________________________________________

DPC routines are part of the interrupt servicing dispatch mechanism and disable the possibility for a process to utilize the CPU while it is interrupted until the DPC has finished execution.

Highest DPC routine execution time (µs): 314.29850

Driver with highest DPC routine execution time: ndis.sys - Network Driver Interface Specification (NDIS), Microsoft Corporation

Highest reported total DPC routine time (%): 0.288840

Driver with highest DPC total execution time: cmudaxp.sys - C-Media Audio WDM Driver, C-Media Inc

Total time spent in DPCs (%) 0.834058

DPC count (execution time <250 µs): 236473

DPC count (execution time 250-500 µs): 0

DPC count (execution time 500-999 µs): 17

DPC count (execution time 1000-1999 µs): 0

DPC count (execution time 2000-3999 µs): 0

DPC count (execution time >=4000 µs): 0

_________________________________________________________________________________________________________

REPORTED HARD PAGEFAULTS

_________________________________________________________________________________________________________

Hard pagefaults are events that get triggered by making use of virtual memory that is not resident in RAM but backed by a memory mapped file on disk. The process of resolving the hard pagefault requires reading in the memory from disk while the process is interrupted
and blocked from execution.

NOTE: some processes were hit by hard pagefaults. If these were programs producing audio, they are likely to interrupt the audio stream resulting in dropouts, clicks and pops. Check the Processes tab to see which programs were hit.

Process with highest pagefault count: searchindexer.exe

Total number of hard pagefaults 107

Hard pagefault count of hardest hit process: 80

Highest hard pagefault resolution time (µs): 10444.1780

Total time spent in hard pagefaults (%): 0.012556

Number of processes hit: 3

_________________________________________________________________________________________________________

PER CPU DATA

_________________________________________________________________________________________________________

CPU 0 Interrupt cycle time (s): 3.152745

CPU 0 ISR highest execution time (µs): 95.002250

CPU 0 ISR total execution time (s): 0.240482

CPU 0 ISR count: 15864

CPU 0 DPC highest execution time (µs): 312.2290

CPU 0 DPC total execution time (s): 2.025879

CPU 0 DPC count: 195597

_________________________________________________________________________________________________________

CPU 1 Interrupt cycle time (s): 0.145655

CPU 1 ISR highest execution time (µs): 71.0830

CPU 1 ISR total execution time (s): 0.007632

CPU 1 ISR count: 1470

CPU 1 DPC highest execution time (µs): 156.977750

CPU 1 DPC total execution time (s): 0.032375

CPU 1 DPC count: 4747

_________________________________________________________________________________________________________

CPU 2 Interrupt cycle time (s): 0.313203

CPU 2 ISR highest execution time (µs): 2.45350

CPU 2 ISR total execution time (s): 0.000049

CPU 2 ISR count: 29

CPU 2 DPC highest execution time (µs): 314.29850

CPU 2 DPC total execution time (s): 0.166350

CPU 2 DPC count: 30377

_________________________________________________________________________________________________________

CPU 3 Interrupt cycle time (s): 0.111494

CPU 3 ISR highest execution time (µs): 4.445250

CPU 3 ISR total execution time (s): 0.000530

CPU 3 ISR count: 471

CPU 3 DPC highest execution time (µs): 78.54750

CPU 3 DPC total execution time (s): 0.003921

CPU 3 DPC count: 545

_________________________________________________________________________________________________________

CPU 4 Interrupt cycle time (s): 0.175799

CPU 4 ISR highest execution time (µs): 2.2550

CPU 4 ISR total execution time (s): 0.000035

CPU 4 ISR count: 23

CPU 4 DPC highest execution time (µs): 101.90950

CPU 4 DPC total execution time (s): 0.012382

CPU 4 DPC count: 1404

_________________________________________________________________________________________________________

CPU 5 Interrupt cycle time (s): 0.110466

CPU 5 ISR highest execution time (µs): 5.3840

CPU 5 ISR total execution time (s): 0.000311

CPU 5 ISR count: 209

CPU 5 DPC highest execution time (µs): 93.5640

CPU 5 DPC total execution time (s): 0.004549

CPU 5 DPC count: 543

_________________________________________________________________________________________________________

CPU 6 Interrupt cycle time (s): 0.150359

CPU 6 ISR highest execution time (µs): 2.923750

CPU 6 ISR total execution time (s): 0.000031

CPU 6 ISR count: 18

CPU 6 DPC highest execution time (µs): 75.430

CPU 6 DPC total execution time (s): 0.017617

CPU 6 DPC count: 2617

_________________________________________________________________________________________________________

CPU 7 Interrupt cycle time (s): 0.108249

CPU 7 ISR highest execution time (µs): 5.0440

CPU 7 ISR total execution time (s): 0.000189

CPU 7 ISR count: 124

CPU 7 DPC highest execution time (µs): 71.406750

CPU 7 DPC total execution time (s): 0.005565

CPU 7 DPC count: 660

_________________________________________________________________________________________________________

 

A bit alarming here: "and to the CPU cover"......there is no cpu cover. You only apply the thermal compound to the top of the CPU (pea size and let the force of the heat sink spread the thermal compound out evenly and naturally. If you used more then a pea sized amount then you may have to much which can then cause overheating issues.

Can you post a picture of what you are referring to about the CPU cover....that has me really worried.

 

actually i think i may have solved this one myself as I believe my cpu fan was not seated all the way to the cpu. So with that im gonna mark this as solved as I solved it myself i believe.

 

"CPU cover" = heat spreader, maybe? (Intel covers their CPUs with aluminum "heat spreaders". You don't get to see the silicon. Fanatical overclockers sometimes "de-lid" Intel processors to put the heat sink in direct contact with the silicon.)