Windows 10: CPU jumps to 100% for a 1 min or2 and then back to normal while gaming

CPU jumps to 100% for a 1 min or 2 and then back to normal while gaming

Hello

So this problem started 3 days ago and i have no idea what causing it. Before everything was running normal and no problem







Pc specs

Operating System Windows 10 Pro 64-bit
CPU Intel Xeon E5440 @ 2.83GHz Harpertown 45nm Technology
RAM 8.00GB Dual-Channel DDR3 @ 533MHz (7-7-7-20)
Motherboard MSI G41M-S01 (MS-7592) (CPU 1)
Graphics LG ULTRAWIDE (2560x1080@60Hz) 2047MB NVIDIA GeForce GTX 750 Ti (Gigabyte)
Storage 931GB Western Digital WDC WD10EZEX-60ZF5A0 ATA Device (SATA )
465GB Western Digital WDC WD5000AAKX-001CA0 ATA Device (SATA )
Optical Drives No optical disk drives detected
Audio VIA HD Audio(Win 10)

:)

 

100% CPU

I bought new gaming laptop yesterday, everything is oki except CPU

it always reached at 100% and 64c degrees, tried with fan built in laptop got 27c degrees but CPU still 100%

i use win 10 64OS

1511 version

 

CPU Usage 100%

PC starts with 100% cpu usage. It won't come down even cpu is left idle. Cpu fan won't stop, when temp are normal.

 

100% CPU Usage after Windows 10 upgrade

Hello Aaron,

Thank you for posting on Microsoft Community. We regret the inconvenience caused and will assist you in resolving the issue.

Most of the time, computers only use a small fraction of their CPU power. In fact, many computers use less than 5% of their CPU most of the time. When you open an application, play a video game, or encode media file, the CPU usage will rise or spike temporarily.
Once the CPU intensive process completes, the CPU usage should once again drop down to lower level. Most applications will not use up more than 50% of your CPU for an extended period of time. However, some programs and system processes can use up a large amount
of CPU without you even knowing it. This may happen if a program gets stuck in an infinite loop or encounters an unexpected error.

I suggest you to perform Safe mode and Clean boot procedures on the PC by following the steps below.

Step 1: I suggest you to boot your PC in Safe mode by following the steps from the link below and check if the issue is resolved.

Safe mode is a diagnostic mode that starts your computer with limited drivers necessary to run Windows. The words
Safe Mode appear at the corners of your monitor to identify which Windows mode you are using.

Expand the options to boot into Safe Mode:

http://windows.microsoft.com/en-in/windows-10/start-your-pc-in-safe-mode



Reboot the PC to exit from Safe mode.

To know more about Safe mode, following is an article on
Windows Startup Settings (including safe mode) (Applies to Windows 10 also):

http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-safe-mode

Step 2: If the issue persists, perform Clean boot on your PC by following the steps from the link below and check if the issue is resolved.

Putting your system in Clean Boot state helps in identifying if any third party applications or startup items are causing the issue.

I suggest you to perform clean boot by following the steps from the link below and check if the issue is resolved.

You can open the system configuration window in Windows 10:

a. Using run command.

• • Press Windows Key + R keys on the Keyboard.
  • Type msconfig.msc and press Enter.

b. Using Cortana.

• • Press Windows icon key on the keyboard and type msconfig.
    
  • Select the top most search result.
    

Follow the steps from 3 under How to perform a clean boot
for Windows 8.1 and Windows 8 from the link below (The steps for clean boot suggested in the link below for
Windows 8/8.1 is applicable for Windows 10 as well):

https://support.microsoft.com/en-us/kb/929135

Disclaimer: Start the computer in normal mode refer the section,
How to reset the computer to start normally after clean boot troubleshooting
from the link above.

Write to us with the status of the issue on the same post for further assistance. Your reply is most important for us to ensure we assist you accordingly.

Thank you.