Windows 10: Crash / BSOD

I had several issues after upgrading to 10, so I wiped my drive and did a clean install. Updated everything I could think to, but I'm still getting freezes / BSODs on a regular basis. I don't have much to go on - it happens when I'm trying to play games (doesn't matter which - FO4, D3, LoL), and is fairly irregular. Sometimes I can go an entire evening without it happening, other times it's every ten minutes. Usually when I get a BSOD, it gets to 100% but never restarts and doesn't create a dmp file. The ones I have all point to ntoskrnl.exe, which isn't super helpful. Most of the time, the system just locks up though and needs to be force shut down. I ran MemTest86 for the past few days just to rule that out and had zero errors. I haven't done any overclocking myself.


Windows 10 Home x64
CPU: AMD FX-9590 8 core 4.72 GHz
RAM: 16GB (2x8) Corsair Dominator Platinum DDR3 1866
GPU: Sapphire Radeon r9-290x 8GB tri-ocx
Mobo: Asus Sabertooth 990fx r2.0
SSD: Samsung 850 PRO 256GB

:)

 

BSODs on windows 10, don't know which driver is failing

You best bet to get some answers on this is to go the the Windows Ten BSOD Crashes and Debugging Forum located

here. They do a good job of analyzing BSOD issues.

JohnD

 

PLS HELP MY COMPUTER RESTARTS AUTOMATICALLY

Okay. Now I see other users reporting that too.

https://www.tenforums.com/bsod-crashes-debuggin...

https://www.tenforums.com/bsod-crashes-debuggin...

Now what I suggest is:

1. Install another 3rd party AV until next week.

2. Next week, Install version 1803(Though it is releasing tomorrow but for stability wait until next week) which should resolve this.

 

Please remove Slimcleaner to prevent it from making things worse.

Please run CPU-Z | Softwares | CPUID, open it and make screenshots of the following tabs

• CPU
• Mainboard
• Memory
• SPD*
• Graphics

*SPD shows the details of each module, you can show the details by choosing different slots in the left upper corner.
Please make screenshots of each module.

Please post each screenshot in your next reply/replies.






Diagnostic Test

DRIVER VERIFIER


Warning Please make a backup of your important files and get your rescue media or create one.
Please create a restore point.
Please follow this tutorial to run driver verifier.

Driver verifier stresses your drivers and will crash your pc if any driver fails due to a violation.

Driver verifier should be performed for a max of 48 hours, or when you have a bluescreen, whatever comes first.

If driver verifier has found a violation and you can't get back into windows normally, try to boot into safe mode and reset in safe mode driver verifier, or in the troubleshooting options open command prompt and type verifier /reset.



Note Your system will act very sluggishly while driver verifier is enabled, this is normal as your drivers will be being subjected to heavy testing in order to make them crash.

Please fill in your system specsPlease follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.How to fill in your system specs:

 

update : I've been running Driver Verifier for the last 12 hours or so, with no issues.

 

Okay, had another bsod tonight - this one listed as a system_service_exception.

 

Verifier is disabled?

Please update the BIOS to the newest version
SABERTOOTH 990FX R2.0 | Motherboards | ASUS Global

 

At the moment, yes. The guide said not to run it consecutively for more than 48 hours, so I turned it off last night. Never had any issues while it was running; I'll turn it back on today, though.

 

You won't (yet) need to re-enable driver verifier *Smile
Please reset verifier and let me know how it goes *Smile