Windows 10: Create second instance of sound device

I have two software programs that require different settings (levels)of the same sound device. I know I can manually change the levels in Settings/Sound/Properties, but it would be easier if I could have TWO instances of the device show up under sound devices, then I rename one of them, and tell my software which one to use. I would NEVER be using both programs at the same time , so I am not asking to record or play from two devices simultaneously. The device is an external USB audio codec.

:)

 

Second Instance of printer

What are you trying to accomplish?

In general, you can have multiple instances of the same printer, but how you go about doing this will depend on what you're trying to do. For example, I have two identical HP printers connected by wi-fi. The "Print" dialog thus permits me to select where
I want the output to go.

If you have one printer that is always connected to the same USB port, you should be able to create a second instance of the printer in Devices and Printers as follows:

1. Click "Add a printer" in Devices and Printers
2. Select "Add a local printer"
3. Select "Use an existing port"
4. In the drop-down list next to "Use an existing port," select the port to which the printer is already attached. For an HP printer, this is likely to be "DOT4_001" or similar, although it might be "Virtual USB xxx." If you're not sure, see the note below.
5. Click "Next"
6. Select the make (HP) and model of the printer from the "Install printer driver" dialog (perhaps you're doing this so one instance of the printer can use a different driver, such as a PostScript driver)
7. Make the appropriate choices on the next page and complete the Wizard

Note for step 4: If you need to confirm the port to which the printer currently is connected, right-click on the printer's icon in Devices and Printers and select "Printer properties" (NOT "Properties" or "Printing preferences"). Click the "Ports" tab.
The port to which the printer is connected will be checked and highlighted. You may have to click and drag on the faint vertical separator bar between "Port" and "Description" in the table's header row.

 

Good surround sound headset

I know you say you're not that guy, but stepping into the $250+ range really brings a change in build quality that might have you never having to buy another set. Otherwise, getting 6 speakers with decent sound in a headset is hard, and that's what you are asking for, and I have no suggestions, but just a bump up the list. *Stick Out Tongue

 

Bluetooth multiple device instances/ Removal problem

Hi,

The issue might occur if there are outdated or incompatible drivers.

I suggest you to follow the methods below an check if it helps.

Method 1: Use the hardware troubleshooter to fix the issue

The Hardware Troubleshooter is an automated tool which will check the hardware connected to the computer for any known issues with it and provides the details and on how to fix them. Follow these steps and run the troubleshooter.

Follow these steps:

• Press Windows key to get the Start menu.
• Type Troubleshooting in the search box right up corner and hit enter.
• Click on Troubleshooting tab.
• Click on view all option on the upper left corner.
• Select the Hardware and Device options from the list.
• Click Next to run the Hardware and Device Troubleshooter.

If the issue persists, follow method 2.

Method 3: Update the Bluetooth drivers.

Step 1: Check for the latest driver update through Windows Updates.

• At the Start screen, type Windows Update.
• Click or tap Settings on the right side of the screen, and then select
  Install optional updates from the left results.
• When the Windows Update control panel opens, click on “Check for Updates” on the top left corner to receive a fresh list of updates.

Incompatible or not properly installed graphics card drivers are the most common cause of this issue.

Step 2: Follow the steps below to update the sound drivers.

• Press Windows + X key on the keyboard.
• Go to device manager.
• Right-click your Bluetooth devices.
• Click Update Driver Software and then follow the steps in the wizard that appears.

Restart the computer and check.

Let us know the status of the issue in this regards to assist you further.

Regards,

Guru Kiran