Windows 10: Critical Process Died

Hello guys!
All right?

I set up a new computer recently, I performed a clean installation of Windows 10 (Original), but I have had some BSOD's from time to time, sometimes a 7 or 8 during startup itself, sometimes while running OS without be running anything heavy or different than I usually do normally.

Today it happened. Restarted socinho and then appeared some BSOD's windows before getting up correctly.

I've tried passing the SFC / SCANNOW, but did not solve the problem.

Attached is the minidump today:

Important Note: The only components that did not realize was upgrade my HD's (2x500TB Seagate / Samsung) + (1x1TB Seagate) and source (C3Tech 500W).

Thanks in advance!

:)

 

about error: "Critical process died"

See:

Critical Process Died error in Windows 10/8/7 - The Windows

 

Bsod Critical Process Died

Hi...try this:
Critical Process Died.

or do this
Google search .

*john

 

The 6/23/16 dump at 12:59PM indicates a problem with dump_iaStorA.sys. Many of the newer dumps are 0 bytes.

Code: ffffd000`bb1afce8 fffff801`d0ad2170Unable to load image \SystemRoot\System32\Drivers\dump_iaStorA.sys, Win32 error 0n2 *** WARNING: Unable to verify timestamp for dump_iaStorA.sys *** ERROR: Module load completed but symbols could not be loaded for dump_iaStorA.sys dump_iaStorA+0xd2170[/quote] dump_iaStorA.sys is a Intel SATA driver for hard drives. Your is:

Code: 03/06/2015 06:38:57 C:\Windows\system32\drivers\iaStorA.sys[/quote] Looks like there are some updated Intel drivers available for your board: GA-Z170XP-SLI (rev. 1.0)

Attachment 86804

Try them, see if that fixes the problem.

 

Hi, Ztruker!

Thanks for your help.

I just download and install the new driver, I'll see if it still happens the problem, and come back here to warn was solved or not.

Again, thank you!

dump_iaStorA.sys is a Intel SATA driver for hard drives. Your is:

Code: 03/06/2015 06:38:57 C:\Windows\system32\drivers\iaStorA.sys[/quote] Looks like there are some updated Intel drivers available for your board: GA-Z170XP-SLI (rev. 1.0)

Attachment 86804

Try them, see if that fixes the problem.
[/quote]

 

Hello everyone, I came back!
After the driver update the frequency of BSOD's reduced, the error shown on the same also changed, this time the displayed error is related to the storage, my hard drive where the OS is installed is with badblocks, and I am already anticipating the return of the same, I imagine the BSOD's should be related, but would like to confirm, in the annex follows the dumps generated today after two BSOD's.

Thank you again!

 

Looks like the same or similar problem:

Code: ffffd000`2543e408 fffff800`834d400fUnable to load image \SystemRoot\System32\drivers\iaStorA.sys, Win32 error 0n2 *** WARNING: Unable to verify timestamp for iaStorA.sys *** ERROR: Module load completed but symbols could not be loaded for iaStorA.sys iaStorA+0x5400f[/quote] Code: ffffd000`2543e258 fffff800`82f40000Unable to load image \SystemRoot\System32\drivers\volmgrx.sys, Win32 error 0n2 *** WARNING: Unable to verify timestamp for volmgrx.sys *** ERROR: Module load completed but symbols could not be loaded for volmgrx.sys volmgrx[/quote] Both the above are drive related so definitely replace your hard drive.

Saw one other problem:

Code: ffffd000`2543cd68 fffff800`85296063Unable to load image \SystemRoot\system32\DRIVERS\cmdguard.sys, Win32 error 0n2 *** WARNING: Unable to verify timestamp for cmdguard.sys *** ERROR: Module load completed but symbols could not be loaded for cmdguard.sys cmdguard+0x56063[/quote] This one belongs to Comodo Firewall. Replace the drive then run for awhile and see if this repeats.

 

Thank you so much.

I will replace my harddrive and run my system for while.

Then I return to leave a feedback.

Code: ffffd000`2543e258 fffff800`82f40000Unable to load image \SystemRoot\System32\drivers\volmgrx.sys, Win32 error 0n2 *** WARNING: Unable to verify timestamp for volmgrx.sys *** ERROR: Module load completed but symbols could not be loaded for volmgrx.sys volmgrx[/quote] Both the above are drive related so definitely replace your hard drive.

Saw one other problem:

Code: ffffd000`2543cd68 fffff800`85296063Unable to load image \SystemRoot\system32\DRIVERS\cmdguard.sys, Win32 error 0n2 *** WARNING: Unable to verify timestamp for cmdguard.sys *** ERROR: Module load completed but symbols could not be loaded for cmdguard.sys cmdguard+0x56063[/quote] This one belongs to Comodo Firewall. Replace the drive then run for awhile and see if this repeats.[/quote]