Windows 10: Critical process error + windows automatic repair not showing up

The computer was working fine yesterday but today we encountered a critical process error. We let the automatic repair take place and after that nothing was solved so I looked online to see what people were saying and they told us to go to the advanced options on the automatic repair screen, however, now all of a sudden it never goes into the automatic repair state and there is a constant loop of the critical process error!If anyone has had this problem before or knows a solution, it would be much appreciated.Thanks

:)

 

Windows 10 automatic repair error

Hi

Windows 10 startup error

My system showing windows automatic repair but couldn't repair my pic i trying to these step

• bootrec.exe /rebuildbcd
• bootrec.exe /fixmbr
• bootrec.exe /fixboot

Only rebuildbcd was successfuly finish but fixmbr couldn't complete showing some error

Help as soon as possible

Thank you

Arun

 

BSOD Critical Process Died




This is my config, what should i do?

- - - Updated - - -

I tried also this:
Step 1. From the initial Windows screen, accept the default settings for the language to install, the time and currency format as well as the keyboard or input method. Next, click the Repair your computer link instead of Install now.

choose Repair your computer
Step 2. Select Troubleshoot and then Advanced Options.

Step 3. Select Command Prompt.

Step 4. Type diskpart and press Enter key.

Step 5. Type list disk and press Enter. Now pay attention to the disk number and identify which one is the boot disk. Usually, it is Disk 0; if not, find the disk number in your own case and remember to type the correct one in the following relevant steps.

Step 6. Type select disk 0 and press Enter.

Step 7. Type list volume and press Enter. Now pay attention to the volume number of the EFI partition.

Step 8. Type select volume N and press Enter. Also, type the one in your own case instead of N.

Step 9. Type assign letter=N: and press Enter. N: can be replaced by any drive letter that is not taken by any partition. Remember which drive letter you assign here for it is rather useful in the rest steps.

Step 10. Type exit and press Enter to leave diskpart.

Step 11. Now type N: (the drive lettered you just assigned) and hit Enter.

Step 12. Type format N: /FS:FAT32 and hit Enter.

Step 13. Type bcdboot C:\windows /s N: /f UEFI and hit Enter.

Now repeat the process of running the bootrec /fixboot command, bootrec access is denied Windows 10 should be solved now. But if fixboot access is denied occurs on an MBR disk, continue with Fix #2.

All steps until 13. was executed successfully, but still became on
bcdboot /fixboot
Error: Access is denied. And I have a GPT and no MBR Partition

bootrec /rebuildbcd
was successfully, founded Win installation: 0 (ZERO)
complete

bootrec /scanos found also ZERO installations

 

Win10 - Can't boot - BSOD critical process died

Hi,

CRITICAL_PROCESS_DIED is an error that usually occurs if a critical process for Windows failed to run properly.

As an initial troubleshooting, we recommend that you run Hardware and Devices Troubleshooter. This will help you identify and resolve the issue that will be found. Here are the steps:

• Open Control Panel.
• Locate Hardware and Sound.
• Select Configure a device.
• Check Apply repairs automatically.
• Click Next.

The troubleshooter will show you a report if they've found out that there's a problem and they will also try to fix it for you.

Update us with the outcome so we can provide further assistance.