Windows 10: CSR 4.0 isnt working. it used to before on a other pc

Hello,Im trying to pair my xbox one x controller to my pc using an external CSR 4.0 bluetooth usb.When I place the usb in the pc its detected and when I anable it in the hidden pictograms in the toolbar it seems to be working but when i go to the bluetooth settings and try to connect my controller it sas cant make connection to bluetooth.When im at the hidden pictos at the toolbar and RMB the bluetooth dongle and connect a mouse or keyboard with it, it sees the controller and tries to pair it but then sas the controller isnt connected when it clearly is.So i try to update the driver from int

:)

 

CSR 4 dongle driver

where can I find online a CSR 4 Bluetooth dongle driver ?

 

CSR V4.0 Dongle "malfunction"

Hi, Carter,

Try these steps from Johan van Mierlo

In the search type" Device manager" and open it.

Click on the small arrow next to either "Bluetooth" or "Universal Serial Bus controllers"

Right click on "CSR" and select Update Driver

Select" Browse my computer for driver update"

Select on bottom "Let me pick from a list of available drivers on my Computer"

Select "Generic bluetooth Driver"

https://answers.microsoft.com/en-us/windows/for...

 

Problem updating Windows Surface Pro 4 with Windows 10 feature updates

Hi,

I have manage to install image for Microsoft Surface Pro 4 by going to https://support.microsoft.com/en-us/...erecoveryimage and download a recovery image for Microsoft Surface Pro 4.

What I did to reset your Surface from a USB recovery drive was:
Step 1: Make sure your Surface is turned off and plugged in (hold down the power
button for 30 seconds).
Step 2: Insert the USB recovery drive into the USB port on your Surface.
Step 3: Press and hold the volume-down button while you press and release the
power button on your Surface.
Step 4: When the Surface logo appears, release the volume button.
Step 5: When prompted, select the language and keyboard layout you want.
Step 6: Select Troubleshoot > Reset your PC.
If prompted for a recovery key, select Skip this drive at the bottom of the
screen.
Step 7: Select the target operating system you wish to reset. This
refers to the current operating system installed on your Surface.
Step 8: Select Yes, repartition the drives, and on the next page, select Next.
Step 9: Choose Just remove my files.
Step 10: Select Reset.
Surface restarts and the Surface logo displays while the reset process continues
(this can take a while).

This always fails and I have to do the below which continues installation.
Windows 10 Installation Media:

1. Insert the Media (DVD/USB) in your PC and restart.
2. Boot from the media.
3. Select Repair Your Computer.

Select Troubleshoot.

1. Choose Command Prompt from the menu:

Type in the command:
Diskpart
Type in the command:
List disk (Note which disk is your Boot drive number mine is 0)
Type in the command:
Sel disk 0
Type in the command:
List vol (Note which volume is the EFI partition mine is 4)
Type in the command:
Sel vol 4
Type in the command:
assign letter=V:
Type in the command:
Exit
Type in the command:
V:
After you have assigned a drive letter Using Diskpart You can format the EFI partition:
Example: if you assigned a letter V to the partition the command would be:
format V: /FS:FAT32
Type in the command:
bcdboot C:\windows /s V: /f UEFI


Now I have an issue that I cannot install Feature Updates. They keep failing to install.
Any ideas how to resolve issue?