Windows 10: Custom Built PC in a Reboot Loop

Hi all,I recently built this PC.Unsure if it is worth noting but the PC initially worked and had Windows installed, but when going to check the activation status of Windows, this reboot loop begun.I am now attempting to install Windows via USB onto the NVME which I had previously used in an old build, but it has been wiped but my PC is still in a reboot loop.The timing of the reboot seems random, at points I can get almost get through the Windows install, other times it reboots just after the copying step, or it will simply not even get to the point of booting the USB at all.I have updated t

:)

 

Windows 10 endless loop reboot

Hi,

• Have you checked if the hard disk is set as first boot device in the BIOS?
• Which version of Windows is installed on the computer?
• What did the HP supported suggested you to fix the issue?

I suggest you to follow the steps provided in the following article and check if it helps.

Redirecting

If the issue persists, please get back to us with the more information about the interaction with HP support and the outcome of the issue.

 

Stuck in Reboot loop after power cut

Hi,

We understand your concern and appreciate the time and effort that you have invested in to fix the issue.

Before we proceed, I would like you to state which troubleshooting steps have you performed bedsides the mentioned to fix the issue.

As per the description, I suspect that you might be stuck in a reboot loop. I suggest that you perform Power Drain and check if it helps

• Unplug the charger and remove the battery of your laptop, if using a desktop remove the power cord.
• Press and hold the Power button for 30sec
• Plug the charger/power cord and restart system

Hope this helps

Regards

 

Windows 10 automatic repair fail loop

Hi,

We understand your concern and we will provide the assistance required to help resolve the issue.

I suggest that you perform Power Drain which will help you skip the reboot loop and help you access the PC. To perform Power Drain, refer to the steps below

• Unplug the charger and remove the battery of your laptop, if using a desktop remove the power cord.
• Press and hold the Power button for 30sec
• Plug the charger/power cord and restart system.

Hope this helps

Regards