Windows 10: CyberLink PowerRecover- Restore doesn't go away

Hi all,


I have recently gave my Medion PC a factory reset, as it was starting to become slower. At first the factory reset seemed to have been succesful and I was able to normally use my computer for about an hour. I then turned off the computer, and as soon as I turned it back on "CyberLink PowerRecover" appeared and after trying to get rid of the pop-up notification I gave in and rebooted the PC. After about 30 minutes the exact same program showed up, and so I once again rebooted the computer. After three times of repeating this process I still can't use my PC. Does anyone have any solutions and any idea why this happened? I've tried to following methods, but nothing worked:


1. Restart the computer.


After the start-up message appears, press the F8 key.


You must press F8 before Windows starts.



2. Boot Directly to Advanced Startup Options


Start or restart your computer or device.

Choose the boot option for System Recovery, Advanced Startup, Recovery, etc.

On some Windows 10 and Windows 8 computers, for example, pressing F11 starts System Recovery.


3, Performing a Startup Repair


The first thing you can try is booting into the recovery environment, if possible, and then performing a startup repair. To access the recovery environment, turn your computer on and off three times. While booting, make sure you turn off the computer when you see the Windows logo. After the third time, Windows 10 will boot into diagnostics mode. Click Advanced options when the recovery screen appears.


If anyone has another solution, please let me know! I have to use the PC to work form home...

:)

 

Windows doesn`t start. Authomatic repair doesn`t work.

Thanks again!!

I`m sorry I had not noticed that the text on the picture was in spanish. It says that windows has replaced some damaged clusters in "name" file and "directory". Then, at the end "an unspecified error occurred (75736e6a726e6c2e 4f6)".

I`ll do it and I`ll be updating this thread when I have the report.

- - - Updated - - -

I ran SeaTools. These are the results:




Does it mean my HDD is useless?

 

hd6950 to hd 6970

ok
i ve tried everything:with atiflash from dos,winflash.step by step with bios powercolor hd 6970 from the database.
nothing,doesn´t work.any suggestion????

 

my 3Dprinter doesn´t appear

My 3D printer doesn´t appear on when I open 3D builder on the left popup to choose printer.

Is it need to do any previous step?? I thought It was plug and play. the printer is an UP Plus2 from Tiertime so, it is one of the recommended partners manufaturers. any message of error just doesnçt possible to send the prin.