Windows 10: DCP

Have been randomly getting blue screens, pc will restart and freezes on boot unable to load into bios, generally takes several restarts for pc to boot and load. My Boot drive seems to be working fine. How to resolve?https://www.dropbox.com/scl/fo/t7xyc2xcvqxea0krslmrf/AFh71W4RyTpYVUR-x-RwLkA?rlkey=siyqlrs5str5ms1e8sxdk4k35&st=20l2cq2m&dl=0

:)

 

EK Introduces the DCP 4.0 X-RES Combo Pump/Reservoir Unit

EK Water Blocks, Ljubljana based premium water cooling gear manufacturer, is proud to introduce EK-DCP 4.0 X-RES pump/reservoir combo unit, the successor to the renown EK-Reservoir Combo DCP 4.0 and a larger variant of EK-DCP 2.2 X-RES.

EK-DCP 4.0 X-RES is a compact, easy to use water pump/reservoir combo unit. Base and top of reservoir is made of quality POM Acetal while the clear tube is made of quality casted acrylic material. The reservoir has build-in port installed with EK-DCP 4.0 water pump. This reservoir is fully air- and waterproof once closed with the enclosed plugs therefore no water can evaporate.











This reservoir also features vibration dampening rubber mounting system which effectively silents your computer. EK also offers a EK-DCP 4.0 X-RES unit without the pump included for all the existing owners of the aforementioned water pump.

The EK-DCP 4.0 water pump is the ideal solution for all enthusiast built water cooling systems and is compatible with the all standard water cooling system setups. The EK-DCP 4.0 can achieve up to 800L / hour with its powerful, low-noise and extremely reliable design.

• EK-DCP 4.0 X-RES (incl. pump) - 89,41€
• EK-DCP 4.0 X-RES (no pump) - 45,70€

Features:

• Compact design
• All-in-one unit: Reservoir + Pump in a single unit
• Factory pre-installed pump
• Vibration dampening design
• Monitor your water coolant level
• Easy installation

All products are readily available for purchase through EK Webshop and Partner Reseller Network.

 

Windows 10 - Update to build 16299.492 breaks PN-DCP (PROFINET DCP)

On Siemens TIA Portal, PN-DCP (PROFINECT
Discovery and Configuration Protocol) is used to find the devices on the local network by sending broadcast packets and the devices responding with their IP addresses.

But after update from build 16299.431 to build 16299.492 we are no longer able to find the PLC's on the local network.

When looking at the traffic on the network adapter on the PC with the update applied, no PN-DCP packets can be seen.

But when running TIA Portal as administrator, everything's fine; PN-DCP packets are sent and the devices reply as they should.

Before update a normal user was able to discover the devices.

So my questions are:

1. What has happened to the normal user rights concerning PN-DCP?
2. How can we get the normal user back on the saddle?

This is most annoying change as we here at the University are running a course and suddenly the students can't connect to the PLC's any more.

 

EK Launches PWM Variant of EK-DCP 4.0 Water Pump

EK Water Blocks, Ljubljana-based premium water cooling gear manufacturer, is proud to introduce the new EK-DCP 4.0 water pump with power management control. This new pumps allows pulse width modulation (PWM) control of rotation speed trough motherboard BIOS or dedicated fan controller.

The EK-DCP 4.0 PWM water pump is the ideal choice for all enthusiast water cooling systems and is compatible with the all standard water cooling system setups. This pump will easily integrate with the latest water blocks and can achieve up to 800L/hour with its compact, powerful and low-noise design.









Rugged, reliable and quiet, the EK-DCP pump will work silently to ensure your liquid cooling system operates at its peak and makes the most for your hardware overclocking potential. To improve the overall looks the product power cables comes pre-sleeved as standard.

PWM control allows for automatic pump speed regulation depending on your CPU temperature. Full performance on demand or whisper quiet operation in idle mode!

This product is compatible with the EK-DCP 4.0 X-RES pump reservoir combo unit.

Technical specifications:

• Rated voltage: 12V DC
• Power consumption: 18W
• Maximum pressure head: 4.0m
• Maximum flow: 800L/h
• Maximum system temperature: 60°C
• MTBF: 50.000 hrs at 25°C
• Power connector: 4-Pin Molex- and 4-Pin PWM FAN connector