Windows 10: Dead Gateway Detection

How do I enable Dead Gateway Detection in Windows 10

:)

 

dead Gateway GT5032

OK, I have one of the hundreds of dead Gateway's that use the Foxconn C51GU01 MB. I am also seeing some of the GT and other series that use the FIC KTB51G on Ebay with the same condition, no POST, video, or keyboard, only harddrive and fans work. I have read that maybe FIC made the boards for Foxconn. I contacted Foxconn, they said "we supply the board but don't support it". The 2 boards look the same so who knows?
I have my board out, can see no popped capacitors or burned area. Had the power supply tested, they told me it was ok. reset the BIOS and unplugged everything plus all the other tips I have read in the last 3 months. still same results.
questions:
is there any tie to the famous emachine power supply troubles? this has a bestec 300w.
what is the actual failure on these boards?
if both boards are failing, what makes the board fail? is it another part or even the case?
does any body repair them?
can I make my Gateway supplied W-XP work with a new board that is not an exact replacement? if so, how do I do that?
Gateway must know this is a problem board, but they simply don't care. I have been reading other forums that suggest this is a widespread problem.
thanks in advance for any advice.

 

Windows phone is not detecting

Hi Vijay,

Thank you for posting your query in Microsoft Community.

I suggest you to connect the phone to another computer and check if it gets detected. Also, check if the phone gets detected by connecting with a different USB cable.

I suggest you to run the Hardware and Devices troubleshooter by following the steps below:

• Click on the Start button, and type “Troubleshooting” on the search bar.
  
• Click on “hardware and devices”.
• A pop-up will appear, click on the “Next” button and follow the on-screen prompts for troubleshooting.
  

Hope the information is helpful. Keep us posted on the status for further assistance.

 

Limited Connectivity Win 10 (Deafult Gateway Not Avaliable)

Hi John,



This could be an issue with the network configuration for the Ethernet connection on the computer due to incorrect gateway setting as compared to the default gateway.



Is there any third party security software installed on the computer?

Check for the network IP and compare it to the default gateway IP. Follow the steps:

• 
  Press Windows and R key and type cmd. Hit Enter. Type “ipconfig/all” without quotes and hit
  Enter.
  
• 
  Check if the default gateway IP and the network IP (IPV4 or more appropriately IPV6). (Refer to the description provided above in context of the IP matchup).
  

To troubleshoot the issue further, I would suggest you to run the network troubleshooter and check if it finds and fixes any issues with the network settings. Follow the methods:



Method 1: Reset the IP configuration and check if it fixes the issue for us. Follow the steps:

• 
  PressWindows and R key together and type cmd. HitEnter.
  
• 
  Type the following commands and hit Enter:
  

netsh winsock reset

netsh winsock reset catalog

ipconfig /flushdns

ipconfig /release

ipconfig /renew

netsh int ip stop

netsh int ip start



Hope it helps. Get back to us with the updated status. We’ll be glad to assist you further.