Windows 10: Debug report about RAM

Can you help me fix this blue screen error it keeps on happening randomly.******************************************************************************** ** Bugcheck Analysis ** ********************************************************************************PAGE_FAULT_IN_NONPAGED_AREA 50Invalid system memory was referenced. This cannot be protected by try-except.Typ

:)

 

Ethernet is showing as Kernel Debug Network Adapater

Hi,



Thank you for writing to Microsoft Community Forums.



I understand that you see Kernel Debug Network Adapter in Device Manager. This can happen if debugging is turner on. I would suggest you to turn off debugging by following the steps mentioned below:

1. Type command prompt in the search bar on the
   Taskbar.
   
2. Right click on the command prompt icon and select
   Run as administrator.
   
3. Paste the following commands and hit Enter:
   
   bcdedit /debug off
   

If you still see the Network Adapter, you can disable it from Device Manager without problems. Refer the steps mentioned below:

1. Press Windows Logo key + X, to open
   Device Manager.
   
2. Expand Network adapters.
   
3. Now, right click on the Kernel Debug adapter and select
   Disable device.
   

Let us know how it goes.



Regards,

Nikhar Khare

Microsoft Community - Moderator

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

 

To RAM or not to RAM...

Hey genesis what hardware have you bought, you might be able to save on the ram and step up the rest of the hardware a little...

Or you could go out on the town as suggested... *Big Grin