Windows 10: Decided to reset my PC via “remove everything” Bc it’s 6 years old and was getting really...

submitted by /u/KaiserMedina
[link] [comments]

:)

 

Unlink an old android phone from my pc

I go thru the suggested steps: Start - Settings - Phone - Unlink this PC.

When I first open the "your phone" screen the old phone is listed. Not sure if the phone listed is suppose to be selectable or not, but my is not. When I select "Unlink this PC" the phone listed is removed. When I select "Add Phone" the old phone still
shows. I have removed the old phone from my Microsoft Account. I have rebooted after unlink this pc but I still cannot remove my old phone.

 

Cheap Photo box that will get the job done

WEll i took on this project for PP hes a hardware reviewer and wants to get the professional looking pics for the Pc parts

Materials:

• Big cardboard box

• a razor

• white material 3 yards

• cone lights

• stapler

• medical tape

• pvc pipe about 6 inches longer than your box

• white paint any cheap finger paint would work

the project I'm guessing will cost me $30 if it works out properly
I will post pictures and step by step as i do it

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".