Windows 10: Dell TechHub issue

Lee_52 · Jun 17, 2023

Windows 10 Pro 22H2, To use Dell Support Assist to get latest BIOS, etc., Dell TechHub must be Running and not Stopped. When Dell TechHub is Running the computer takes 6 minutes to shut down. When Dell TecheHub is Stopped it takes one minute or less for computer to shut down. Is this issue fixable? Dell TechHub is found with Windows Key + R>msconfig>System Congifuration Utility box>Services tab>scroll. Thanks to Juliet Erum for her excellent advice in March 2023. I hope she reads this.

:)

Johan45 · Jun 17, 2023

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

Brink · Jun 17, 2023

Dell Client Platform Security Update for Dell dbutil Driver

The vulnerability exists in the dbutil_2_3.sys driver. This driver file may have been installed on your Dell Windows operating system when you used firmware update utility packages, Dell Command Update, Dell Update, Alienware Update, Dell System Inventory Agent, or Dell Platform Tags, including when using any Dell notification solution to update drivers, BIOS, or firmware for your system. To best protect yourself, Dell recommends removing the dbutil_2_3.sys driver from your system by following one of three options listed in Remediation Step 1 below.

Dell has remediated the dbutil driver and has released firmware update utility packages for supported platforms running Windows 10, Dell Command Update, Dell Update, Alienware Update, Dell System Inventory Agent and Dell Platform Tags. For supported platforms on Windows when you:

install a remediated package containing the BIOS, Thunderbolt firmware, TPM firmware, or dock firmware; or

update Dell Command Update, Dell Update, or Alienware Update; or

install the latest version of Dell System Inventory Agent or Dell Platform Tags,

The remediated dbutil driver is installed on your system. Refer to Remediation Step 2 for details.[/TD]

Dell Technologies recommends all customers consider both the CVSS base score and any relevant temporal and environmental scores that may impact the potential severity associated with a particular security vulnerability.

Affected Products and Remediation

The vulnerable driver (dbutil_2_3.sys) was delivered to impacted systems in two ways: (1) via affected firmware update utility packages, and (2) via Dell Command Update, Dell Update, Alienware Update, Dell System Inventory Agent, or Dell Platform Tags, including when using any Dell notification solution to update drivers, BIOS, or firmware on your system. The tables in the “Additional Information” section below provide the following information:

Table A lists platforms with impacted firmware update utility packages, including BIOS update utilities, Thunderbolt firmware update utilities, TPM firmware update utilities and dock firmware update utilities.

Table B lists the end of service life platforms with impacted firmware update utility packages, including BIOS update utilities, Thunderbolt firmware update utilities and TPM firmware update utilities.

Note: The dbutil_2_3.sys driver vulnerability does not impact the actual firmware updates that these utilities deliver. Rather, the vulnerability exists in the dbutil_2_3.sys driver that is packaged with the firmware update utility.

Remediation Steps:
Impacted customers must complete 2 steps as follows:

Immediately remove the vulnerable dbutil_2_3.sys driver from the affected system using one of the following options from Step 1 below: download and run a utility to remove the driver from the system (Option 1), manually remove the driver from the system (Option 2), or on or after May 10, 2021, utilize one of the Dell notification solutions to run the utility (Option 3).

As described in Step 2 below, obtain and run the latest firmware update utility package(s), Dell Command Update, Dell Update, Alienware Update, Dell System Inventory Agent, or Dell Platform Tags as applicable.

Step 1: Immediately remove the vulnerable dbutil_2_3.sys driver from the affected system using one of the options below. NOTE: If you are using the Dell System Inventory Agent you must first download the latest available version (2.6.0.0 or greater) here.

Option 1 (Recommended): Download and run the Dell Security Advisory Update – DSA-2021-088 utility.

Option 2: Manually remove the vulnerable dbutil_2_3.sys driver:

Step A: Check the following locations for the dbutil_2_3.sys driver file

C:\Users\<username>\AppData\Local\Temp

C:\Windows\Temp

Step B: Select the dbutil_2_3.sys file and hold down the SHIFT key while pressing the DELETE key to permanently delete.

Option 3 (available by May 10, 2021): If you use one of the Dell notification solutions, you can use it to obtain and run the Dell Security Advisory Update – DSA-2021-088 utility.

Scenario 1: If your Dell notification solution is configured to automatically notify you of updates, and configured to automatically download and apply them, then this utility is automatically downloaded and applied for you.Scenario 2: If your Dell notification solution is not configured to automatically download and apply updates, obtain the utility via one of the Dell notification solutions , by clicking “Check for Updates”, and then selecting and applying Dell Security Advisory Update – DSA-2021-088.
Step 2: To prevent reintroduction of a vulnerable dbutil driver, obtain and run a remediated firmware update utility package, Dell Command Update, Dell Update, Alienware Update, Dell System Inventory Agent, or Dell Platform Tags as applicable.
For firmware update utility packages: With your next scheduled firmware update, download and apply the latest available firmware update utility which contains a remediated dbutil driver. Customers can use one of the Dell notification solutions to receive updated firmware update utility packages, as applicable.Notes:

For supported platforms running Windows 10, updates are available as of the publishing of this advisory. (See Table A)

For supported platforms running Windows 7 or 8.1, updates are expected to be available by July 31, 2021. Once the updates are available, this advisory will be updated. If you update your BIOS, Thunderbolt firmware, TPM firmware, or doc firmware prior to the updates being available, you must also execute one of the three options defined in Step 1 of this section – even if you have previously performed this step – immediately following the update.

If you update your BIOS, Thunderbolt firmware, TPM firmware, or dock firmware, to a version prior to the versions listed in Table A, you must also execute one of the three options defined in Step 1 of this section – even if you have previously performed this step – immediately following the update.

Remediated packages are not be provided for end of service life platforms (see Table B). Customers using these platforms must also execute one of the three options defined in Step 1 of this section – even if you have previously performed this step – immediately after you apply an affected firmware update.

For Dell Command Update, Dell Update, and Alienware Update: These components are automatically updated with the self-update feature. If this feature is not enabled on your system, run your respective update application by connecting to the internet, opening it, and clicking “Check for Updates.”
For Dell Platform Tags: Visit here and download the latest available version (4.0.30.0, A04 or greater).

For Dell System Inventory Agent: Visit here to download the latest available version (2.6.0.0 or greater).
Click to expand...

Read more:

https://www.dell.com/support/kbdoc/e...-vulnerability

https://www.zdnet.com/article/patch-...er-since-2009/

hurricane51 · Jun 17, 2023

Edge Search Does Not Permit Change of Region

I got these suggestions from the Microsoft Community forum.No. 1 worked for me:

Thank you for posting the query on Microsoft Community. I am glad to assist you on this.
We have reproduce the issue here and we are able to access non-regional search for google using Microsoft Edge.
I would suggest you to try the below steps and check if it helps.
Step 1:
Clear browsing data option of Microsoft Edge and check if you face the issue. To do so perform the steps below.

Click on the More actions icon next to the feedback icon present on top right corner of the Project Spartan homepage.

Select Settings and click on Choose what to clear.

Check the boxes Browsing history, Cookies and saved website data and Cached data and files and click on Clear.

Step 2:
I suggest you to create a new user account and check if the issue occurs.

Go to Settings.

Choose Accounts and then select Family and other users.

Select add someone else on this PC.

Enter a user name and hit next.

Click on Finish.

Sign out from the current Account and Log into the new account.

Step 3:
It could also happen because of network issue. I suggest you to try with different network connection and check if it helps.

Windows 10: Dell TechHub issue

Dell TechHub issue

Dell TechHub issue

Dell TechHub issue

Dell TechHub issue - Similar Threads - Dell TechHub issue

Dell TechHub service won't start and displays the error "Error 1053: The service did not...

Dell TechHub service won't start and displays the error "Error 1053: The service did not...

Dell TechHub issue

Dell TechHub issue

Issues with windows 11 dell

Dell c65522QT Touchscreen issues

Dell c65522QT Touchscreen issues

Dell Image bitlocker issue

Dell computer with Windows issues according to Dell