Windows 10: Designate COM 1 Port for external hardware.

I have Windows 11 and a new engine diagnostic tool, connected to computer via USB, needs me to designate COM 1 port to communicate with computer. How do I do this? I can't find any port references in the Device manager.

:)

 

My Seagate external hard drive is not detected when plugged in to USB port of my laptop using windows 10?

Thanks for your response.

I have tried all the steps provided, however in vain. The external hard drive is not identified at all in any of the the USB ports when connected. The USB ports identify other external Flash drives and devices. However this drive is detected in another laptop
using Windows 7 OS. Please advise further.

Regards

 

USB Port Oddities


Ok, let's see it with pictures step-by-step. First right-click on the USB device and select Update driver software:





Then select Browse my computer for driver software (LAST option) :





The select Let me pick from a list of device drivers on my computer (LAST option) :





Then select the standard driver from the list and click next:





Click next/OK as required to complete installation. Repeat the steps for all Intel USB devices. Finally click on each USB root device and press DEL to delete it, reply YES when asked. After deleting all USB root devices restart the computer.

I hope this is detailed enough...

 

External drive

Hi Richard,

There are several factors that can cause your external drive to not read DVDs even though the system is recognizing the device. This could be caused by a driver that needs to updated or corrupted files. For us to resolve your concern, kindly answer the questions
below:

• Just to confirm, the device that is not working properly is a external DVD optical drive?
• Were there any recent changes or updates installed on your computer?
• Have you tried to plug the external drive to a different port on your computer?

As a initial recommendation, we suggest that your run the built in troubleshooter in Windows 10. Kindly refer to the steps below:

• Type “Troubleshooting” in the Search bar and press Enter.
• Click on “View All” in the top left corner.
• This will display the list of troubleshooters which are built-in in the computer. You can click on
  Hardware and Devices from the list and you can run the troubleshooter.

This will check for common errors that affect hardware on your computer and attempts to correct them.

We look forward to your response after completing the steps.