Windows 10: Desktop stuck on boot loading screen with ssd installed

HiAs you probably noticed, pc WILL boot without ssd, but this issue came randomly after i restarted desktop. Ive had this setup running fine for a few weeks now. Specs: asus b760-i strix Recovery mode goes to blank screenKnown issues: when i Press the psu cpu cable it turns off desktop entirely. What can i do?

:)

 

windows update stuck at installation screen and cannot get to desktop

Hi Sue,

To understand the issue better, I would like to ask some questions:

• Is the computer stuck in the Installing updates screen?
• For how long is the computer stuck in the screen?
• When was the computer last updated?
• Is the screen showing any percentage of installation?

Sometimes the installation might take a long time to install if the update is of large size. So, I suggest you to wait for sometime and check if the system boots to the desktop. If it is taking a longer time, then perform a Power Drain by following the steps
provided below:

• Shut down the Computer.
• Remove all power source (including battery if it is a laptop).
• Press and hold the power button for 15-20 seconds.
• Connect the power source and start the computer.
• After the computer boots to the desktop, suggest you to install all the pending updates.

Hope this helps. Keep us posted on the status for further assistance.

Thank you.

 

Stuck on Windows Loading Screen

i have an old pc . i have installed a graphic card . it working fine when i newly format my pc but untill i shut down & turn power off . after i switch on my pc back it stuck on loading screen , sometimes on bios flash screen ,Sometimes it boot up then my pc freeze .when i removed graphic card it boot up & works fine . this problem is haunting me for months . i don't know which parts in my pc damaged. is it graphic card or motherboard or ram or cpu or hdd . i'm lost here..

 

PC won't boot after Windows loading screen!

Hi,

An Automatic Repair or Startup Repair can help you resolve your concern. This tool is used when you cannot boot your Windows properly. To run Startup Repair, you can go through
Settings > Update & Security > Recovery > Restart now (Under
Advanced start-up). However, since you cannot enter your Desktop, we suggest you to force fail your computer. To do so, kindly follow the steps below:

• Boot your computer.
• While on the logo screen, do a force shutdown by pressing the Start button.
• Wait until you see "Preparing Automatic Repair" appears. If it doesn't appear, repeat the steps until it do so.
• After the loading screen, you will have a black screen and another loading screen will appear.

By then, it will now diagnose your computer and will do an Automatic Repair.

Let us know how it goes.