Windows 10: Did Dell install the wrong ram?

My 3671 is now about 14 months old. I installed two 8gb Corsair ddr4-2400 sticks of ram in it when I bought it. Never noticed the original stick of ram, just removed and stored it.

Now the Corsair is throwing errors and blue screens, Corsair wants to exchange it. So I put the factory ram back in, the computer works fine now, but the bench shows 2666, not 2400. Sure enough the ram is tagged as 2666mgz. Did Dell install the wrong ram?



:)

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

 

To RAM or not to RAM...

Hey genesis what hardware have you bought, you might be able to save on the ram and step up the rest of the hardware a little...

Or you could go out on the town as suggested... *Big Grin

 

Dell Quickset in Windows 10 does not appear to disable the keyboard and touchpad in tablet mode

Hi Terry,

Welcome to Microsoft Community.

I would suggest you to un-install and re-install Quickset and see if that makes any difference:

I suggest you to follow these steps:

• Press Windows + R keys
• Type appwiz.cpl
• Choose Quickset and click on un-install.

Re-install from Dell's website and see if that helps.

Regards,