Windows 10: different weather information for same location and in same time rain

I have tried checking weather info for rain and it saw 0 change of rain in my area within 4 hrs of range and i switch to 10 day mode and it shows its raining and it will rain within 4 hrs of range .https://ibb.co/Y79DF91G https://ibb.co/bMM7ZMy6link : https://www.msn.com/en-us/weather/maps/precipitation/in-Bharatpur,Nepal?loc=eyJsIjoiQmhhcmF0cHVyIiwicjIiOiJDaGl0d2FuIERpc3RyaWN0IiwiYyI6Ik5lcGFsIiwiaSI6Ik5QIiwidCI6MTAyLCJnIjoiZW4tdXMiLCJ4IjoiODQuNDMyOTk4NjU3MjI2NTYiLCJ5IjoiMjcuNjgzMDAwNTY0NTc1MTk1In0%3D&weadegreetype=C&rcmode=2&zoom=10

:)

 

Location incorrect in weather app and find my device

Windows 10 has several settings that control access to a device's location. They can be found under:

Settings -> Privacy -> Location

The first two settings are called Location and Location service. If either one is turned off, then Windows will NOT REVEAL your location to apps that ask.
Location is a system-wide setting, and if turned on, then
Location service controls location access for the current user only.

• Make sure that Location and Location service are both turned on.

The next setting lets you specify a Default location to be used whenever Windows cannot determine your location with any degree of accuracy or confidence. I'll come back to this setting in a moment.

This is followed by a way to Clear your location history stored on this device, as well as
some links to manage or review information concerning your location online.

After that, you should see a list of Apps. This is where you can allow or deny location access on a per-app basis.

• Make sure this setting is turned on for the "Weather App" and "Find My Device".

Please note that despite having identical names, this more general Windows 10
Default location setting does NOT work in the same way as the Default location setting in the Weather App. The Weather App will
always use its default location if one is specified. Windows 10 only uses its more general default location setting if all else fails. I have devised an experiment, which exploits that difference. I think it should be able to identify the
underlying location problem on your system.

1. Start the Weather App and select the Settings tab. Make sure that
   Launch Location is set to "Always detect my location".
   Exit the Weather App.
2. Go to the general Windows 10 Settings -> Privacy -> Location and temporarily set your
   Default Location to somewhere that's way off - wrong by thousands of miles (let's say Timbuktu in Mali).
3. Note which of the following networks are up and accessible form your Surface Pro 2017:
   
   (a) Ethernet, (b) Wi-Fi, (c) Bluetooth, (d) cell phone connectivity (via optional LTE-Advanced modem).
4. Start the Weather App again and select the Favorites tab. Make a note of the first listed favorite (the Launch Location), and exit the Weather App.
5. If it is Timbuktu (Windows hasn't got a clue where you are), then go to Step 9.
6. If it is Cape Coral (Windows THINKS it knows where you are, but it's WRONG), then go to Step 8.
7. If it is Knoxville (Windows got it right), then the
   Location Service works correctly when Windows has access to the infrastructure of the networks you noted as available in Step 3. Go to Step 8.
   
8. To reproduce the problem and perhaps isolate the cause, disable all the networks listed in Step 3. Then re-enable each of the networks ONE AT A TIME, repeating the steps from Step 3 each time. If you ever get to Step 6, then the one-and-only enabled network
   that time is the SOURCE OF YOUR PROBLEM. If you ever get to Step 7, then ADD the one-and-only enabled network that time to YOUR LIST of reliable location sources.
   
   SOLUTION A:
   
   (a) Ensre that a network on YOUR LIST of reliable location sources is up and available.
   
   (b) Whenever you require an accurate location, ensure that the network observed to be the SOURCE OF YOUR PROBLEM is neither up nor available.
   
9. Using the infrastructure of the networks you noted as available in Step 3, Windows was not able to determine your location with any degree of accuracy or confidence. Enable as many of the networks listed in Step 3 as you can. Restart the experiment at Step
   3. If you still end up here, then you MUST EITHER modify the general Windows 10
   Default location setting every time you need an accurate location OR ...
   
   SOLUTION B:
   
   Move back to Cape Coral, Florida.
   
   Phew!

 

Any solution to the time formats in Weather App (for windows 10)?

Hi Mickey,

One of the possible reasons that this issue occurs is due to alignment of the computer’s time settings and the weather app time settings. To help you with this issue, kindly follow these steps:

• Open the Weather App and click
  Settings (the gear icon in the lower-left corner).
• Set Launch Location to Default Location, then type your location (e.g. kvívíkar) and press Enter.
• Restart the Weather App.

If the issue persists, make sure that the region is the same as what is set in the Weather App. Follow these steps to check region settings:

• Click the Start button, then type
  Region and press Enter.
• Under Country or region, choose the same location as what is set in the Weather App.
• Restart the computer and check if you will encounter the same issue.

Update us with the outcome.

 

How Do I change the weather location on Desktop?

Hi,

Thank you for posting in Microsoft Community.

In Weather app by default it takes the system location. You have to search manually to look out for weather of particular location.

I suggest you to set your region and language and check if it helps:

• 
  Go to Control Panel and select Clock, Region and Language.
  
• 
  Click on Language to set your language as default.
  
• 
  Next select Region and in the dropdown select country as
  your region.
  

There is no option to change the location of the Weather in Weather app. I suggest you to give your feedback in feedback app.

Thanks.