Windows 10: Disable ethernet

I connected to a mobile hotspot recently, and now this "No Internet" option is showing on top of the Wi-Fi page.



When I click on it, it takes me to the ethernet settings page. How can I remove this from the list? Right clicking the device in settings does nothing.

:)

 

IP configuration not valid - interference from ethernet adapter?

Solution 1: No Internet Access In Windows 8.1or Windows 10

Step 1:

Go to Device Manager → Network adapters.
Step 2:

Expand it (Network adapters).


Step 3:

Select your network adapter


Step 4:

Right click on your wireless network adapter or Ethernet adapter and then tap “Update Driver Software”.
(in this case your network adopter is Ethernet adopter so tap your Ethernet adapter)
Step 5:

Now on a new window you will need to click on “Browse my computer for driver software”.




Step 6:

Then select “Let me pick from a list of device drivers on my computer”.



Step 7:

Now choose the “Manufacturer’s drivers” from the list of two and then click next.



Step 8:

After the completion of the process just restart your PC and check if the problem is solved or not. If not, goto solution 2.



Solution 2: No Internet Access In Windows 8.1,windows10

Step 1:

Open command prompt.
Step 2:

Just go on hitting the enter after typing the each command.
netsh int tcp set heuristics disabled
netsh int tcp set global autotuninglevel=disable
netsh int tcp set global rss=enabled
Step 3:

Now to check if the settings are disabled type:
netsh int tcp show global
then hit enter.
Step 4:

Now the thing left is just rebooting your system and just check if the problem is solved or not and just give feedback.*chuckle*Thumbs

 

Cannot connect to ethernet no valid ip configuration

We appreciate the information you've provided. We'd like to confirm the results after following the steps on the link provided on our previous post.

Meanwhile, to isolate your concern, we suggest that you check the following:

• 
  If the Ethernet port is clean.
  
• 
  If the end of RJ45 (Ethernet cord) is still intact.
  
• 
  If available, test the RJ45 (Ethernet cord) to your other device and check if issue persists.
  

We look forward to your reply so we can assist you further.

 

Constantly disconnecting with ethernet cable

Hello,

Thank you for keeping us posted on the status of the issue.

I suggest you to check if rolling back the Ethernet driver helps to resolve the issue. Follow the below steps.

• First of all, Press Windows logo + R from keyboard. It will open
  RUN.
• Now type devmgmt.msc and press Enter to open Device Manager.
• You will see all the device list of your PC. Expand Network Adapters

Rollback driver

Double click on your Ethernet driver in Device Manager. Then Click on
Driver tab and select Rollback.

Important: If your drive is performing well and there is no error, Rollback driver button will be grayed out as an option.

If it still does not help, I suggest you to reinstall the drivers for the Ethernet driver and check if it helps to resolve the issue.

Note: Once you uninstall the drivers the Ethernet adapter device will be disabled and you won’t be able to connect to internet. So it is advisable to keep all the installer files as a back up in your hard drive.

Write to us with the results for further assistance.

Thank You.