Windows 10: discussion on testing types

1. details have to be knownall

:)

 

Overclocking / Undervolting guide for Vega 56 or 64?

Here's a quick laundry list:

List of software to use for overclocking and testing
Examples:
Wattman (and how to find and use it, like an overview, including profiles)
Unigine Valley or Heaven (use this for quick testing while changing settings in Wattman and checking for stability / artifacts) ...just suggesting this
How to monitor cores / mem speeds and temps during testing (I've seen screen overlays, and others using GPUz)

Step-by step overclocking in Wattman
Fan speeds
Power limit
Temp limit
Voltages
Core speeds
Memory speeds

 

Remove account


I suggest you backup your personalized files first before removing the account.
To delete an account, follow these steps:

1. Press WIN + X keys and click Command Prompt (Admin) from the menu.
2. Type the following command and press Enter. Replace test with the name of your sister's account. Code:
   
   Code:

   net user test /del

 

Test Sign mode

Hi Koutz,

The test mode message indicates that the test signing mode of the operating system is started on the computer. The test signing mode may start if an installed program is in a test phase because it uses drivers that are not digitally signed by Microsoft.

I'd like to know some details of the concern to help provide the appropriate resolution. Kindly answer the following question below:

• Which build and version of Windows 10 are you running?
• Is BitLocker enabled on your computer?

For you to disable the test mode, you will need to run it as an administrator. To do this:

• Search cmd on the taskbar then right-click on
  Command Prompt then select Run as administrator.
  If you are prompted by a User Account Control window, tap or click Yes.
  
• In the Command Prompt window, type the following command, and then press Enter:bcdedit -set TESTSIGNING OFF
  
• After you see the confirmation, close the Command Prompt window.
• Save any unsaved work, and then restart the computer.

If it still wouldn't disable the test mode, I suggest that you enable the built-in administrator account so you can disable this feature. Please note that you will be using this solely for troubleshooting purposes only. I do recommend disabling this after
the troubleshooting to avoid messing up your computer's functionality.

To enable the built-in administrator account, follow these steps:

• Type cmd in the search bar, right-click Command Prompt, and then click
  Run as Administrator.
• When you are prompted by User Account Control, click Continue.
  
• At the command prompt, type net user administrator /active:yes, and then press Enter.
• Type net user administrator <Password>, and then press Enter.
  
  Note In this command, <Password> represents the actual password that you want to set for the administrator account.
• Type exit, and then press Enter.
• Log off the current user account.
• Log back in with the admin account then disable the test mode by following the steps above or you can refer to this
  link.

To disable the built-in administrator account, follow these steps:

• Type cmd in the search bar, right-click
  Command Prompt, and then click Run as Administrator.
• When you are prompted by User Account Control, click Continue.
  
• At the command prompt, type net user administrator /active:no, and then press Enter.
• Type exit, and then press Enter.
• Log off the current user account.

Update us with the results.