Windows 10: Disinfect Windows 10 most thoroughly 2023 FR

I'll show you the most thorough methods to check for infection in Windows 10 in all places it hides, remove it completely, then check for any damaged system files to fix.1 To check most thoroughly for infection and any resulting System damage, Download, install and run a full scan with the most powerful on-demand free scanner Malwarebytes: https://www.malwarebytes.com/mwb-download/ Make sure to only choose the Free version.In the Malwarebytes Settings gear icon > Security tab set it to include scanning for Rootkits.2 If necessary run it in Safe Mode with Networking to have internet,

:)

 

Disinfect Windows 10 most thoroughly (2023) NL

Disinfect Windows 10 most thoroughly (2023)

I'll show you the most thorough methods to check for infection in Windows 10 in all places it hides, remove it completely, then check for any damaged system files to fix.

1) To check most thoroughly for infection and any resulting System damage, Download, install and run a full scan with the most powerful on-demand free scanner Malwarebytes: Download Malware Removal | Free Antivirus Scan & Virus Protection Tool Make sure to only choose the Free version.

In the Malwarebytes Settings (gear icon) > Security tab set it to include scanning for Rootkits.

2) If necessary run it in Safe Mode with Networking (to have internet), or Safe Mode accessed by one of these methods: How to start Windows 10 in Safe Mode (9 ways) - Digital Citizen. These require a password and not PIN to access.

3) Clean up anything found, restart PC and then run again until it comes up clean.

4) Then download, install and run a full scan with AdwCleaner: Download AdwCleaner

Remove whatever it finds.

5) Check for anything found but is still left over in Settings > Apps > Apps & Features, and C:\Program Files and C:\Program Files(86) to uninstall or delete them. I can guide you how to do this if there are problems.

6) Also check in each of your browser's Extensions, Home Page settings, Search service or Add-On's as shown here: How to Disable or Remove Browser Extensions to disable anything you didn't add yourself and are sure you need. Ask back if in doubt.

6) Then check for damaged System files by running System File Checker and DISM from Step 10 in this checklist:

Yandex

7) If completing all of Step 10 in above Checklist doesn't fix it then run a Repair Install which reinstalls Windows while saving your files and apps in place, brings it up to the latest version by the most stable method, takes about an hour and resolves most problems: https://translate.google.com/transl...ware.com/how-to/fix-windows-10-repair-install'

8) If you want to keep Malwarebytes as an on-demand scanner then you can turn off its Real Time trial version using the slider buttons on it's front panel. I recommend it as the #1 tool for your toolbox.

For best WIndows performance, use built-in Defender which gives adequate real-time protection.

If you were referred here from another thread, please post back results in that thread. Otherwise you can ask questions and share information in the Comments section below, including any broken links.

______________________________________________

Standard Disclaimer: There are links to non-Microsoft websites. The pages appear to be providing accurate, safe information. Watch out for ads on the sites that may advertise products frequently classified as a PUP (Potentially Unwanted Products). Thoroughly research any product advertised on the sites before you decide to download and install it.

 

Disinfect Windows 10 most thoroughly (2023)

I'll show you the most thorough methods to check for infection in Windows 10 in all places it hides, remove it completely, then check for any damaged system files to fix.

1) To check most thoroughly for infection and any resulting System damage, Download, install and run a full scan with the most powerful on-demand free scanner Malwarebytes: Download Malware Removal | Free Antivirus Scan & Virus Protection Tool Make sure to only choose the Free version.

In the Malwarebytes Settings (gear icon) > Security tab set it to include scanning for Rootkits.

2) If necessary run it in Safe Mode with Networking (to have internet), or Safe Mode accessed by one of these methods: https://www.digitalcitizen.life/4-ways-boot-safe-mode-windows-10. These require a password and not PIN to access.

3) Clean up anything found, restart PC and then run again until it comes up clean.

4) Then download, install and run a full scan with AdwCleaner: Download AdwCleaner

Remove whatever it finds. Check for anything found but is still left over in Settings > Apps > Apps & Features, and C:\Program Files and C:\Program Files(86) to uninstall or delete them. I can guide you how to do this if there are problems.

5) Also check in each of your browser's Extensions, Home Page settings, Search service or Add-On's as shown here: How to Disable or Remove Browser Extensions to disable anything you didn't add yourself and are sure you need. Ask back if in doubt.

6) Then check for damaged System files by running System File Checker and DISM from Step 10 in this checklist: Redirecting

7) If completing all of Step 10 in above Checklist doesn't fix it then run a Repair Install

which reinstalls Windows while saving your files and apps in place, brings it up to the latest version by the most stable method, takes about an hour and resolves most problems: How to Fix Windows 10 with a 30-Minute Repair Install'

8) If you want to keep Malwarebytes as an on-demand scanner then you can turn off its Real Time trial version using the slider buttons on it's front panel. I recommend it as the #1 tool for your toolbox.

For best WIndows performance, use built-in Defender which gives adequate real-time protection.

If you were referred here from another thread, please post back results in that thread. Otherwise you can ask questions and share information in the Comments section below, including any broken links.

______________________________________________

Standard Disclaimer: There are links to non-Microsoft websites. The pages appear to be providing accurate, safe information. Watch out for ads on the sites that may advertise products frequently classified as a PUP (Potentially Unwanted Products). Thoroughly research any product advertised on the sites before you decide to download and install it.

 

Windows 10 Phone app fixes (2023) FR

I'll give you everything possible for fixing phone app. Even if you've tried a step please try it over in sequence here:

1) Requirements and setup for phone app:

Configuration requise pour l’application Mobile connecté - Support Microsoft

How to setup Your Phone on Windows 10 and sync data between your PC and phone



2) If it won't work properly then try resetting the App in Settings > Apps > Apps & Features > Your Phone or Phone link > Advanced Options > Repair and then Reset. Restart PC.

3) Next try re-registering the app from Option 2 here:

Reinstall and Re-register Apps in Windows 10

4) If those don't work then try the latest fixes working for Phone app:

Résolution des problèmes de l’application Phone Link - Support Microsoft

Aide et apprentissage de l’application Mobile connecté

https://translate.google.com/transl...fix-common-problems-your-phone-app-windows-10

https://translate.google.com/transl...-windows-10-your-phone-app-not-working-issue/

https://support.microsoft.com/fr-fr/help/4053443/windows-10-linking-your-phone-pc-help

https://translate.google.com/transl...text-messages-from-windows-10-your-phone-app/

https://translate.google.com/transl...how-do-i-get-past-the-check-your-phone-screen

https://translate.google.com/transl...m/2018/08/troubleshooting-your-phone-app.html

https://translate.google.com/transl...-windows-10-your-phone-app-not-working-issue/

https://translate.google.com/transl...-your-phone-app-is-not-working-in-windows-10/

https://translate.google.com/transl...p-not-working-or-will-not-open-on-windows-10/

One of these should normally fix it.

5) You can try reinstalling the app here:

https://translate.google.com/transl...ll-or-reinstall-your-phone-app-in-windows-10/

6) Go over this checklist to make sure the install is set up correctly, optimized for best performance, and any needed repairs get done: https://translate.yandex.com/transl...529fd4-fac7-4653-893a-dd8cd4b4db00&lang=en-fr

Start with Step 4 to turn off Startup freeloaders which can conflict and cause issues, then Step 7 to check for infection the most thorough way, then step 10 to check for damaged System Files, and also Step 16 to test a new Local Admin account. Then continue with the other steps to go over your install most thoroughly.

7) Update your drivers and BIOS/UEFI firmware from PC or motherboard maker's Support Downloads web page, using the full model number, Serial Number or Dell Service Tag on sticker.

Compare the latest drivers available for download with the ones presently installed in Device Manager reached by right clicking the Start Menu. Make sure you have the latest BIOS or UEFI firmware, Chipset, Display (Video), Sound, USB3, Bluetooth, Network and all other drivers, or else download and install the latest now.

Updating drivers from the Device Manager or Windows Update is rarely enough. The most basic thing we need to learn to maintain a PC is keep the latest manufacturer's drivers installed from their Support Downloads web page.

8) If this was caused by Windows Update(s) then you can check which were installed at Settings>Update & Security>Windows Update under Update History, then uninstall them from the link there, and immediately check for these again and hide with the Hide Updates tool explained here: https://translate.google.com/transl...0-hide-show-windows-updates-windows-10-a.html

You can also use System Restore to get before the problem began, then check for Updates with the Hide Update tool and hide them: https://translate.google.com/transl...central.com/how-use-system-restore-windows-10

9) If nothing else works then do a Repair Install, by installing Media Creation Tool and then choosing to Upgrade Now. This reinstalls Windows while keeping files, programs and most settings in place, and is also the most stable method to advance to the latest version: https://translate.google.com/transl...ware.com/how-to/fix-windows-10-repair-install

If you were referred here from another thread, please post back results in that thread. Otherwise you can ask questions and share information in the Comments section below, including any broken links.

________________________________________________________

Standard Disclaimer: There are links to non-Microsoft websites. The pages appear to be providing accurate, safe information. Watch out for ads on the sites that may advertise products frequently classified as a PUP (Potentially Unwanted Products). Thoroughly research any product advertised on the sites before you decide to download and install it.