Windows 10: Display and USB issues

Few months back one random morning I started having a problem my computer with only two of the three displays and usb were connecting and disconnecting. So i went through trying to find if anyone had the problems and couldnt find anything. So i went through some standart trouble shooting. Try to see if there was any new events that happened see if anything cause it to updating had this problem didn't see anything then I started going to the hardware side went barebones won't stick around 1 CPU the motherboard plugged it all in with only the display for working still did it went to one GPU still doing it nothing on hardware side effects it takes a few buddies see if they ever had a problem one of them said that they had something similar and it was a PSU I've had problems with this PSU manufacture before and I went to a buddy that had an old computer of mine got the PSU out of it took it home tried it out no work this is probably two months and by this point.so I diagnosed it that it's probably a motherboard issue seeming that is still doing it with almost no hardware into it. So contacted motherboard manufacturer they said shipping and we'll see what we can do but in a box and forgot about all the emails and it's been about 4 months now so buddy of mine that had my old computer brought this computer to me so I can use it hooked everything up all very old hardware 3 to 4 years old nothing that I've ever had a problem with always work whenever I needed it I hooked up my old drives to it so I had all my saves and turned it on still has a problem so I backed up all my files disconnected to my storage drives and then reset Windows on my SSD after I was done resetting it started working fully 500% like it's supposed to not a single problem all three displays showing up USBS are not having a freak out it was turning out to be great well three days later which was this morning I turn on my computer after installing graphics drivers and updating graphics drivers and I went to sleep while it was updating woke up went to the computer you play some YouTube and it started doing again only two of the displays were showing up out of the three if you look into display settings it would show that they'll be a third screen connected but it will sometimes disconnect and reconnect and I'll show unavailable. USBS are freaking out reconnecting disconnecting every 5 seconds and I have no idea what's causing this I tried deleting my graphics driver putting it back to the day before nothing has helped.


Rig #1

Cpu 6700k

Gpu 2 gtx960

Psu evga 1000 watt

Ram 1 16gig stick of vengeance ddr4



Rig #2

Cpu 3500k

Gpu 1 gtx 670

Psu corsair 650 wattt

Ram 2 sticks of 8 gig.vengeance ddr3

:)

 

USB doesn't display MP4 file!


I have a 300kb mix of .png, .jpg, .pdf files on a 4Gb USB drive. I added a 2Gb MP4 movie but it doesn't display in the drive files. I used CCleaner to check the drive F files .. it only shows up as 2Gb of OTHER FILES, but not in the listed files.

Any (constructive) suggestions welcome. I can't remove it as it doesn't show in the file list.

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

 

Display Issue Please Help

Hi Ahmed,



Thank you for posting your query in Microsoft Community. We appreciate your interest on Windows 10.

I understand the inconvenience you are facing while scrolling down. We are glad to help you.



To serve you better, let me know this:

What exactly happens when you shut down the computer?



I would suggest you to try the following steps and check:

Step 1: Update the Display driver. Please follow the steps given below to update the display driver.

• Click Start and go to Run.
• In the Run prompt, type devmgmt.msc and then click
  OK.
• Device Manager will open.
• In Device Manager expand Display adapters.
• Right-click the display driver and click Update Driver Software.
• Select Search Automatically for Updated Driver Software.

Step 2: Check if there are any updates for display drivers available in Optional Updates; this might fix the issue. Refer to the following steps.

• At the Start screen, type Windows Update.
• Click or tap Settings on the right side of the screen, and then select Install optional updates from the left results.
• When the Windows Update control panel opens, click on “Check for Updates” on the top left corner to receive a fresh list of updates.

Step 3: If the issue persists, I would suggest you to uninstall and reinstall the Display driver. Please follow the steps mentioned below to uninstall the display driver.

• Open Device Manager.
• Expand Display adapters.
• Right-click the display card driver and click
  Uninstall.
• Windows will prompt you to confirm the device’s removal. Click OK to remove the driver.
• After the un-installation is complete, reboot your computer as soon as possible.

Computer will load the generic display drivers. Now, please go to the manufacturer’s website, download and install the compatible display card drivers for your computer and check.



Hope this is helpful. Feel free to contact us for further queries. We will be happy to assist.



Regards,

Jenith