Windows 10: Display not showing after update

I used the NVIDIA APP to download and install the newest driver and my screen went blank during the process, and I couldn't access safe mode or the bios. I finally just took off the back cover and unplugged the graphics card and rebooted the computer. Then I turned the system back off and plugged the graphics card back in and turned it back on. It worked like a charm. I have my secondary graphics card disabled. Should I enable this integrated graphics for safety during these updates or is there any a way I can access my advanced settings to repair this if it happens again. I have a media disc,

:)

 

Display driver not supporting and device manager not showing Display adapter option

Hi Maheen,

Thank you for posting in Microsoft Community.

This issue could have occurred due to these reasons:

• Incorrect settings.
• Corrupt or outdated display driver.

Try the steps listed here and check if it helps:

Method 1:

I suggest you to download and install all the available Windows Updates including Optional Updates. Check if it helps.

Method 2:

If the issue persists, i suggest you to uninstall and re-install latest display driver from the computer manufacturer website and check if it helps.

Step 1: Uninstall display driver.

• Right-click on the Start Button and click on
  Device manager.
• Double-click on Display Adapters to expand.
• Right-click on the display adapter driver that is listed and select properties.
• In the window opened, click on drivers tab.
• In the drivers tab, Click on Uninstall option.

Now restart your computer and check, if the problem persists try step 2.

Step 2:

Re-install display driver from the manufacturer website.

Let us know if the issue is resolved or if you need further assistance, we will be glad to help.

 

4870x2 won't display at 1680x1050 at all!

OK. Now I know what ur problem is. Step by step:
1. Go to Catalyst Control Center
2. Click on the word "Graphic" right on top left corner. It will display drop down menu
3. Click on Display monitor and will see the list of monitor at near bottom
4. Right Click the monitor and select "Configure". It will show up the window
5. There will be 3 option to select. Select the middle one and then click on the tab which show the bar with 15%.
6. Drag the bar to max, and the screen will stretch to the native resolution 1680x1050.
7. Also click the tab with showing RGB drop down list and select the last one (it will change to image quality for pc).
That's it. Good Luck.

 

Windows Updated(16299.309).KB4088776 Restart is required to complete.

Hi dalchina. Good news, I followed your suggestion and reinstalled the update and now it appears as "installed correctly" *Biggrin Maybe it was not necessary to run the Windows Update Troubleshooter or maybe if necessary. But using it I do not think it could have worsened something. The installation was very fast, unlike the first time it showed step 1 and step 2 completed.

Thanks for the suggestions and for the time to respond Best regards.


And thanks for the tip of that program, I'll have it on my list.