Windows 10: Display not support my monitor

My monitor's optimal Resolution is 1366x768 60Hz but my pc's resolution is 1440x1040 what to do?

:)

 

No display on monitor when TV set as primary display

Issue solved

Removed DVI/HDMI cable from computer and monitor

Step 1: Check if the VGA monitor cable is defective.

1. Turn off computer
   
2. Connect the monitor VGA cable from the monitor to the VGA port on the computer
   
3. Turn on computer, VGA monitor cable is good.
   
   Step 2: Tun off computer
   

1. Connect HDMI Cable to HDMI port and TV
   
2. Turn on computer and TV, there is no monitor black screen
   
3. Click on the Windows logo, select the Settings icon , and then select
   
   System. Under Display there are two squares, labeled 1 and 2
   
   D Click on Advanced Display Settings:
   
   Display information: Display 1- Monitor Display 2 -TV
   
   E Right-click the Speakers icon in
   the taskbar, select Sound, click on Playback devices,
   
   
   a s tv screen with my brand shows
   AMD High Definition Audio Device ready.
   
   F. Problem solved
   
   
   
   Cause of the problem: Defective VGA port on the Syba VGA HD15+ 3.5 Audio to HDMI converter
   

 

External Monitor displaying at 1920x1080 and not 2560x1080

Hi,



Thank you for writing to Microsoft Community Forums.



This issue could be because of the cable you are using to connect the monitor, below are few information you will find helpful.



HDMI cable supports 1080p of maximum resolution, whereas DVI-D cable supports 1680 x 1050, mini DisplayPort supports 2560 x 1440 and mini DisplayPort to VGA supports 192x1050 resolution.



I suggest you to try with different cable and check if that works and try the below steps and check if that helps.



Steps:

1. I suggest you to
   uninstall the Intel graphics driver from
   
   the device manager and reboot the computer once and check.
   
2. I also suggest you to
   Download drivers and firmware for Surface and check.
   
3. You can also open Intel graphics properties and try to change the display resolution from there.
   

Additional information:
Displays that work with Surface Studio.





If you still face the issue, please reply to this post with more information.



Hope it helps.

Amit Sunar

Microsoft Community – Moderator

 

Second monitor doesn't always display?

Hi Erik,

A secondary display may not resume after sleep due to some issues with the graphics driver or issue with the monitor's video cable. We suggest that you download and update the graphics driver by going to the laptop's manufacturer's support site.

You may also try to replace the monitor's video cable and see if resolves the issue. As we checked the specifications of your monitor, it turns out that it has a DVI-D and VGA ports. You may check your monitor's manual or visit the manufacturer's support
site to get more information.

Let us how it goes after performing the suggested troubleshooting steps.