Windows 10: Display pc issues 3 months on going

At this point have no idea. Pc randomly shut off couple times 3 months ago now and booted to repair mode. Thought maybe repair loop tried everything but no solution. Ended up finding possible display driver issue. Any time installed or updated driver, pc would eithercrash and boot to repairmode, no path found, or automatically disable itself. Nothing would fix the problem even exceperts, factory reset, clean windows install, all new hardware, safe mode install, udd, core isolation, compatibility mode, ext. After 3 months ish turned on pc and display driver was working but what caused this an

:)

 

Display was not migrated

Hi,

I understand the above solution didnt work so as to next step in solving your issue I suggest you follow the below.

Step 1:

Go to search box next to Windows icon and type Device Manager

Step 2:

Under Device Manager expand Display Adapter

Step 3:

Right-click on Adapters listed one by one and select Properties

Step 4:

Select the Drivers tab

Step 5:

Click on Uninstall Device

Step 6:

Repeat step 3 to 5 for all listed adapters under Display Adapter

Step 7:

Restart PC and verify

Let me know the status after performing the above.

Regards

Shuaib

Independent Advisor

 

Display Issue Please Help

Hi Ahmed,



Thank you for posting your query in Microsoft Community. We appreciate your interest on Windows 10.

I understand the inconvenience you are facing while scrolling down. We are glad to help you.



To serve you better, let me know this:

What exactly happens when you shut down the computer?



I would suggest you to try the following steps and check:

Step 1: Update the Display driver. Please follow the steps given below to update the display driver.

• Click Start and go to Run.
• In the Run prompt, type devmgmt.msc and then click
  OK.
• Device Manager will open.
• In Device Manager expand Display adapters.
• Right-click the display driver and click Update Driver Software.
• Select Search Automatically for Updated Driver Software.

Step 2: Check if there are any updates for display drivers available in Optional Updates; this might fix the issue. Refer to the following steps.

• At the Start screen, type Windows Update.
• Click or tap Settings on the right side of the screen, and then select Install optional updates from the left results.
• When the Windows Update control panel opens, click on “Check for Updates” on the top left corner to receive a fresh list of updates.

Step 3: If the issue persists, I would suggest you to uninstall and reinstall the Display driver. Please follow the steps mentioned below to uninstall the display driver.

• Open Device Manager.
• Expand Display adapters.
• Right-click the display card driver and click
  Uninstall.
• Windows will prompt you to confirm the device’s removal. Click OK to remove the driver.
• After the un-installation is complete, reboot your computer as soon as possible.

Computer will load the generic display drivers. Now, please go to the manufacturer’s website, download and install the compatible display card drivers for your computer and check.



Hope this is helpful. Feel free to contact us for further queries. We will be happy to assist.



Regards,

Jenith

 

4870x2 won't display at 1680x1050 at all!

OK. Now I know what ur problem is. Step by step:
1. Go to Catalyst Control Center
2. Click on the word "Graphic" right on top left corner. It will display drop down menu
3. Click on Display monitor and will see the list of monitor at near bottom
4. Right Click the monitor and select "Configure". It will show up the window
5. There will be 3 option to select. Select the middle one and then click on the tab which show the bar with 15%.
6. Drag the bar to max, and the screen will stretch to the native resolution 1680x1050.
7. Also click the tab with showing RGB drop down list and select the last one (it will change to image quality for pc).
That's it. Good Luck.