Windows 10: Display problem

Hi, so I was trying to connect to a projector when it wouldn't show up, it would flash to a black screen, and go back to the no signal screen. I found the problem, but there is another problem with that problem, I have selected "PC Screen only" in the project options. I changed it, but nothing changed. When I go back to the project options, it is still the same option "PC Screen only" I tried going into display settings, control panel and that was no help. Even device manger. This did happen to me a long time ago with a TV, but now I need to connect to the projector. Any display I connect to,

:)

 

Driver and/or display problem (AMD)

Try this:

• Right click on a blank area of your desktop and select "Display Properties"

• Select "Advanced Display Settings"

• Select "Display Adapter Properties"

• Click on "List all Modes"

• Select the preferred display mode. Something with at least 60Hz.

• Then select your setting you want

• See if the option came back

 

Display driver not supporting and device manager not showing Display adapter option

Hi Maheen,

Thank you for posting in Microsoft Community.

This issue could have occurred due to these reasons:

• Incorrect settings.
• Corrupt or outdated display driver.

Try the steps listed here and check if it helps:

Method 1:

I suggest you to download and install all the available Windows Updates including Optional Updates. Check if it helps.

Method 2:

If the issue persists, i suggest you to uninstall and re-install latest display driver from the computer manufacturer website and check if it helps.

Step 1: Uninstall display driver.

• Right-click on the Start Button and click on
  Device manager.
• Double-click on Display Adapters to expand.
• Right-click on the display adapter driver that is listed and select properties.
• In the window opened, click on drivers tab.
• In the drivers tab, Click on Uninstall option.

Now restart your computer and check, if the problem persists try step 2.

Step 2:

Re-install display driver from the manufacturer website.

Let us know if the issue is resolved or if you need further assistance, we will be glad to help.

 

4870x2 won't display at 1680x1050 at all!

OK. Now I know what ur problem is. Step by step:
1. Go to Catalyst Control Center
2. Click on the word "Graphic" right on top left corner. It will display drop down menu
3. Click on Display monitor and will see the list of monitor at near bottom
4. Right Click the monitor and select "Configure". It will show up the window
5. There will be 3 option to select. Select the middle one and then click on the tab which show the bar with 15%.
6. Drag the bar to max, and the screen will stretch to the native resolution 1680x1050.
7. Also click the tab with showing RGB drop down list and select the last one (it will change to image quality for pc).
That's it. Good Luck.