Windows 10: Display problem

I have motherboard z97 gaming from MSI when I put my VGA Card GTX 1660 Ti in the middle both the displays are working but when I shift the VGA card to upper or lower PCI slot one display does not work , thanks

 

Driver and/or display problem (AMD)

Try this:

• Right click on a blank area of your desktop and select "Display Properties"

• Select "Advanced Display Settings"

• Select "Display Adapter Properties"

• Click on "List all Modes"

• Select the preferred display mode. Something with at least 60Hz.

• Then select your setting you want

• See if the option came back

 

4870x2 won't display at 1680x1050 at all!

OK. Now I know what ur problem is. Step by step:
1. Go to Catalyst Control Center
2. Click on the word "Graphic" right on top left corner. It will display drop down menu
3. Click on Display monitor and will see the list of monitor at near bottom
4. Right Click the monitor and select "Configure". It will show up the window
5. There will be 3 option to select. Select the middle one and then click on the tab which show the bar with 15%.
6. Drag the bar to max, and the screen will stretch to the native resolution 1680x1050.
7. Also click the tab with showing RGB drop down list and select the last one (it will change to image quality for pc).
That's it. Good Luck.

 

Windows 10 1709 System Restore problems...

That seems to be an attempt at Option 2 in the tutorial, which requires you to
a. Boot to a command prompt (Did you?)
b. You then seem to be mixing steps 3,4 and 5, thus your command is incorrect.

I suggest Option 1 is easier.

If you still have problems, please repost listing each specific step and saying which option from the tutorial you are using. Thanks.