Windows 10: Displayport monitor no signal after bios screen

My displayport monitor (MSI MAG271CQR) does not display anything after the windows 10 boot logo. The Boot logo and the windows logo show and when the login screen loads up, the monitor disconnects (Shows the no signal message), while the second monitor (hdmi) shows the login screen just fine. After logging in, the monitor shows up in the settings too, but still no signal. What could cause the issue?

submitted by /u/JustAskingU4Answers
[link] [comments]

:)

 

Monitor is not working with DisplayPort to HDMI adapter

I have a HP EliteDisplay E222 and it is not able to recieve signals using a HDMI to DisplayPort adapter. I have tried plugging in the DisplayPort side of the adapter into my computer and into my graphics card and both of them give me no signal and that makes
me think it is the monitors issue. However, when I plug the current monitor I am using into the HDMI side of the adapter (when the DisplayPort side of the adapter is connected to my computer) I also get no signal.

I have confirmed that the adapter works on my other computer but I just can not find out why it is not working on my main one.

I have tried:

1. Letting windows pick graphic card drivers (RX 570)
2. Installing the latest drivers
3. Taking the power cable out of my second monitor for one minute
4. Resetting the monitor
5. Turning off the power saving setting in the monitor
6. Turning power mode to high performance in Windows 10

Unfortunately my current monitor has no DisplayPort port. If it did, I could of connected the DisplayPort side of the adapter to it to determine if the graphic card is the problem or if the monitor is.

 

Windows 10 unstable in dual screen setup displayport + hdmi

I just changed my system from an intel i5 2500k to an amd r5 1600 and with almost the same hardware (only changed cpu, motherboard, ram and switched to a m2 ssd as windows drive) and windows version (freshly
resinstalled) windows crashes when I turn my displayport screen on again in dual screen setup with an hdmi screen.

System Configuration:

Motherboard: MSI X370 gaming pro carbon

BIOS: 7A32v17 (AGESA 1.0.0.6)

CPU: AMD Ryzen 5 1600

Memory: 16GB DDR4 3200 (G-Skill F4-3200C16D-16GVKB)

GPU: MSI RX 480 gaming x 8GB

VBIOS: 015.050.000.000

GPU Driver: 17.7.1

OS: Windows 10 Pro N x64 (15063.483)

Steps to Reproduce:

• 
  Plug into gpu ports: BenQ XL2730Z @ displayport, Philips 273P3LPHES @ hdmi
  
• 
  turn on pc and displays, wait for windows login
  
• 
  turn off displayport display
  
• 
  turn on displayport display
  
• 
  what now happens: displayport display stays black (no signal), hdmi display turns black (no signal), pc unresponsive
  
• 
  after 10 - 20 seconds pc reboots automatically
  

Expected Behavior:

displayport display should turn on normally without crashing the pc in dual screen setup

Actual Behavior:

displayport display causes crash when turned on again

Additional Observations:

Turning the hdmi monitor off and on does not crash windows even if displayport display is plugged in.

Unplugging the hdmi monitor and turning the displayport monitor off and on does not crash windows.

I used the exact same hardware and drivers before with an Intel i5-2500k and an Asrock Extreme 3 gen 3 without these issues. Windows and drivers were completely reinstalled though after switching to Ryzen.

***Post moved by the moderator to the appropriate forum category.***

 

install 2nd monitor though displayport

2nd monitor doesn't get signal from pc. pc doesn't detect monitor thru displayport. both monitors work thru vga port but not displayport. How to tell if dispayport is working properly?