Windows 10: Does anyone know how to fix not being able to select the high performance power plan?

The power mode is set to efficiency, in settings, but high performance on Control Panel, since applying efficiency plan in settings, the control panel plan has not changed, since applying efficiency there appears to be no way to change it back to high performance since settings says power mode can't be set while the high performance plan is selected and control panel has no effect, my FPS in Forza Horizon 5 Benchmark has decreased from 116 to 19 and MSI afterburner is reporting GPU speeds of 210Mhz maximum with a 3080ti, compared to 1920Mhz previously, does anyone know the solution?

:)

 

High Performance Power Plan Disappeared

I am using the latest version of Windows 11 and I changed my power plan to "Balanced" just to try it out and when I went back into Control Panel to change it back to "High Performance", it was not there anymore. I tried a lot of suggested fixes that are on the internet but none of them worked. I also tried creating my own power plan and chaning the settings but its just not the same performance as the High Performance power plan. Is there any way to bring it back?

 

High performance Power plan missing.

Hi,

Thank you for writing to Microsoft Community Forums.

We understand the concern as you are unable to create a new power plan with high performance.

In order to get clarity and to assist you accordingly, please reply with the answers to the questions below:

• What is the Version and Build of Windows 10 installed? (Type
  winver in Windows search/Run command)
  
• Is the PC connected to a domain/organization network?
  

Meanwhile, we would suggest you to perform these steps to restore the default power plans on the PC.

1. Click on Start menu and type
   CMD, right click on CMD and select Run as Administrator.
   
2. Type the following command and press Enter:
   powercfg –restoredefaultschemes
   
3. Once the process is complete, then restart the PC and check
   

If the issue persists, then perform these registry changes and check..

Note:
Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection,
back up the registry before you modify it. Then, you can restore the registry if a problem occurs.

Follow the steps to take backup of registry

1. Open the Run dialog box by pressing the Windows key and the R key together.
2. Type Regedit and hit the Enter key.
3. When the Registry Editor opens, navigate to the following location:
   HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power
4. In the right pane, double click on the DWORD entry named CsEnabledand
   set it to 0.
5. Click Ok and restart the PC to check.

Let us know the results. We will certainly assist you further.

Aditya Roy

Microsoft Community – Moderator

 

Power plan?

Upon checking, it seems that there's nothing wrong with your system. It is usual that you have to double-click your mouse before your monitor wakes up.

For the meantime, we suggest changing the power plan by following the steps below:

• Press Windows key + S.
• Type in Power Settings.
• On the pop-up window, choose Additional power settings.
• Select High performance.

After changing the power plan, we suggest that you monitor the changes made and check if that will work for you.

Get back to us if you need further help.