Windows 10: DPC_WATCHDOG_VIOLATION 133 causing PC to force reboot despite no overclocking?

Hello, I have seen people with similar issues but as far as I'm aware there are none identical to what is happening to me, and I was hoping to get some insight.Over the last month and a bit I have been experiencing an issue where I will be in the middle of playing a game or something and my monitor loses signal. It shuts off, but I can still hear audio and communicate with people via Discord. After about a minute or two, the audio goes bust and my PC force reboots itself. Sometimes the monitor comes back on after these reboots, sometimes not and I have to manually turn off PC and back on again

:)

 

DPC_WATCHDOG_VIOLATION (133)

The log files displayed a RAM overclock.

The BSOD debugging displayed no misbehaving drivers.

Turn off Windows Driver Verifier.

The RAM modules were not seen on the Qualified Vendor List (QVL)

a) Had they been checked to see if they were or were not on the QVL?

b) If not, please check now and report whether they are or are not on the QVL.

The CPU: Ryzen 7 5800X supports RAM up to 3200 MHz.

The RAM speed when the log collector ran was recorded at 3600 MHz.

c) Make sure that there is no overclocking during the troubleshooting.

d) Turn off XMP.

If there are continued BSOD after turning off the RAM overclock then swap test RAM that is displayed on the QVL.

133, 1A. 3B

 

DPC_WATCHDOG_VIOLATION (133)

Hi there,

I keep getting the DPC_WATCHDOG_VIOLATION (133). I ran the minidump file through WinDbg, but I don't know how to proceed from there, and I was hoping that someone could help me.

I've been trying to fix this for a bit, so I've been going down a list of possible fixes for watchdog violations and for "\Driver\WUDFRd failed to load." Among the things I've done, I've checked for updates (everything seems to be up to date), I've tried adjusting Windows Driver Foundation (but I couldn't locate it), I've reinstalled all the USB controllers, and I even reset the PC.

I would appreciate any help!!

Here's snip from WinDbg:

 

DPC_WATCHDOG_VIOLATION (133) by athw10x.sys

Hello ! BSOD in my pc has been occured many times. It has error code , "DPC_WATCHDOG_VIOLATION (133)." I have analyzed that problem with WindDbg and I've found that my wireless driver (athw10x.sys) caused this BSOD. I've tried to update this driver, but it was the last version for my pc. So, what should I do to overcome this problem ? Thank you Notes : -My windows version number is 21h1 (10.0.19043) - My wireless network is Qualcomn Atheros AR956x (10.0.3.462) Dump files link : LAPTOP-J94P1LUI-(2021-11-17_12-28-01).zip - Google Drive