Windows 10: Drive D is not on my SSD with windows but on my old hard drive. Disk managment looks a mess!

Hello,I cant make sense of much of this honestly. Drive E is my oldest drive which I'd like to remove entirely. C is my SSD with Windows installed and F is my current storage for games and media, etc. Not sure how this screen should look but it seems there is a good deal of extra nonsense?Would greatly appreciate some insight into how to rectify this. Thanks

:)

 

How to Partiton a Hard Drive in Vista

This is a way to get Vista to see another hard drive that is not associated with the OS. There is some times when your new hdd doesn't seem to want to work well with Vista. But, there is a solution in it.

Open the Computer Management By doing these steps.

• Click on the Start Button
• Click on Control Panel
• Click Administrative Tools
• Double click on Computer Management

You are now in the Navigation panel of the Computer Management.
When in Computer Management, you then have to allow the new drive to be recognized.

• Double click on Storage
• Double click on Disk Management

Now in the middle of your screen there is the layout of the Disk Drives that you have. The drives that are partitioned will show by the drive lettering. The others will just show up as having nothing at all in them. Below that there will be the Disk drives that are installed into the computer. You'll see that the primary one will all ways read as "Disk 0". Then you will have Disk 1 and so on. Under the Disks there will also see your CD-Rom drives.. If there is more then one, it will be labeled the same as Disk drives..

On to the Partitioning of the drive in question.

• Right Click on the drive
• Click to format the drive or Enable Volume. There will be a series of windows that open up. This is Vista's formatting. Just go threw the windows, and make sure everything is the way you want it to happen.
• Once the formatting is done, will take some time depending on the drive size.
• Right click on the drive
• Click on Mark the Partition as Active

After you have done those steps, The drive will be up and running threw Vista.



:Side Notes:
If you are not the Administer to the Os, then you will have to enable it..
You may also want to redo the drive lettering of it all. But, I really don't see a reason to do so. If you do, you have to redo drive paths and so forth.. A lot of work on something so small...

 

D drive went on vacation

Each volume, C:, D:, and so on are storages on physical drive (hard disk drive, SSD, USB flash...) Device manager operate with physical devices - drives.

The system operates with logical units - volumes - creates on Physical devices.

Please open Device manager and show the open list of disk drives.

Then show the picture of Disk management.

 

Cannot access D drive since upgrading to Windows 10.

Hello Judy,



Thank you for replying quickly with the status of the issue.



Please reply to few more questions:

• 
  Is the D: drive located on the same hard disk or on different hard disk?
  
• 
  Did you have any important data saved on the
  D: drive?
  

If the D: is saved on another hard disk and you are unable to access it, I suggest you to format the drive completely and check if the issue is resolved.



To format the hard disk, follow the steps below:

• 
  Press Windows logo + X keys on the keyboard and select
  Disk management option.
  
• 
  Right click on the D: drive and select
  Format option.
  
• 
  Wait for the formatting to complete and check if the changes are effective.
  

Write to us with the status of the issue for further assistance. Your reply is most important for us to ensure we assist you accordingly.



Thank you.