Windows 10: Drive Management

My pc has a 256GB SSD Crive and a 1TB HDD Drive. In Disc Management the option to extend the Crive is greyed out. The drive is nearly full and the D: Drive is almost empty, so what's the problem. The pc is a Dell Inspiron Aio 7700 and I can't understand how to use the Drive. Please can anyone help. Thanks.

:)

 

How to Partiton a Hard Drive in Vista

This is a way to get Vista to see another hard drive that is not associated with the OS. There is some times when your new hdd doesn't seem to want to work well with Vista. But, there is a solution in it.

Open the Computer Management By doing these steps.

• Click on the Start Button
• Click on Control Panel
• Click Administrative Tools
• Double click on Computer Management

You are now in the Navigation panel of the Computer Management.
When in Computer Management, you then have to allow the new drive to be recognized.

• Double click on Storage
• Double click on Disk Management

Now in the middle of your screen there is the layout of the Disk Drives that you have. The drives that are partitioned will show by the drive lettering. The others will just show up as having nothing at all in them. Below that there will be the Disk drives that are installed into the computer. You'll see that the primary one will all ways read as "Disk 0". Then you will have Disk 1 and so on. Under the Disks there will also see your CD-Rom drives.. If there is more then one, it will be labeled the same as Disk drives..

On to the Partitioning of the drive in question.

• Right Click on the drive
• Click to format the drive or Enable Volume. There will be a series of windows that open up. This is Vista's formatting. Just go threw the windows, and make sure everything is the way you want it to happen.
• Once the formatting is done, will take some time depending on the drive size.
• Right click on the drive
• Click on Mark the Partition as Active

After you have done those steps, The drive will be up and running threw Vista.



:Side Notes:
If you are not the Administer to the Os, then you will have to enable it..
You may also want to redo the drive lettering of it all. But, I really don't see a reason to do so. If you do, you have to redo drive paths and so forth.. A lot of work on something so small...

 

Hard drive/ OS issue

a guy suggested :

• shutdown
• unhooked HDD
• restarted
• yay !!
• reconnected HDD
• restarted
• yay !!

also , try method 3
How do I unlock the drive where Windows 10/11 is installed?

 

Lost data from hard drive, what to do now?

Well, I'm sorry to hear that it's a WD My Passport that failed on you, @tomhenry ! *Frown
I'd recommend you to try using a different USB cable with it and see if that will help your system to detect it without it disconnecting.
I'd also suggest you to go to Disk Management and see how the drive is listed there. It won't hurt to check up on the health and SMART status of the HDD by running the QUICK and EXTENDED tests from the WD's Data LifeGuard Diagnostics. Here's a link to the available software: http://products.wdc.com/support/kb.ashx?id=11ZOpD

Give these troubleshooting steps a try and keep us posted with the results!
SuperSoph_WD