Windows 10: Driver Power State Error Caused by ntoskernal.exe

Hi, I've been getting a BSOD for the past week, and tried unsuccessfully to rectify the problem, without any success. These BSODs can come as often as every 15-20 minutes, or between hours. I used bluescreenview to check the faulty driver, which turned out to be ntoskernel.exe . I've attached the 3 latest dump files in the link below. I would gladly appreciate any solution/remedy to this issue. Many Thanks!


Latest 3 Dump Files: https://1drv.ms/u/s!Ai_fqvO3b7Xngbhvba53N2dE3u_4UA?e=tX7ZZ9

:)

 

driver power state failure help!

Hi,

It is possible that the error Driver Power State Failure you received is can be caused by
the driver itself or power settings.
To address your issue, we suggest that you follow the steps shared by S M Mahmudul Hasan
on this thread on how to troubleshoot Driver Power State
Failure.

Keep us posted if you need additional help.

 

Driver Power State Error

Hi Michelle,

Based on the details provided, the error "Driver power state failure" is due to incompatible driver. Were you able
to access your PC? If you do, we recommend that your display adapter and check if there are any changes. To update your display adapter, follow these steps:

• 
  Right-click
  on the
  Start menu
  and choose
  Device Manager.
  
• 
  Expand
  Display adapters,
  right-click
  on your
  graphic driver, and choose
  Properties.
  
• 
  Under
  Driver tab, click on
  Update Driver.
  
• 
  After updating,
  restart
  your PC and monitor for any changes.
  

If the issue persists, kindly
update the driver manually
by downloading the latest driver update available in your manufacturer's website and install it.

For more information and other possible troubleshooting for the
Blue Screen Error: Driver power state failure, kindly refer to this
link.

Let us know how it goes.

Regards.

 

Power driver state failure

Hello, thanks to contact the Microsoft Community. My name is Israel Torres, I am an Independent Advisor.

Driver Power State Failure errors are usually caused by a computer or device driver going into sleep mode while you’re still using the device. Windows would send a wake signal to the device once it is needed and if the device doesn’t respond in time or at all,
Windows flags a Driver Power State Failure error. The error can be caused either by the driver itself or power settings.

Fix Windows 10 Driver Power State Failure error

Two popular causes of this error were graphics drivers and Wi-Fi card drivers. It makes sense to update both while you’re here.

1. Navigate to Control Panel, Hardware and Sound and Device Manager.

2. Select your Network adapter and/or Display adapter.

3. Right click, select ‘Update Driver Software and Search automatically…’.

4. Reboot your computer and retest.

If a new driver doesn’t work, turn off power saving.

1. Navigate to Control Panel, Hardware and Sound and Power Options.

2. Select ‘Change power settings’ next to the active power plan.

3. Select ‘Change advanced power settings’ text link.

4. Select ‘Change settings that are currently unavailable’.

5. Find Graphics Settings or PCI Express and Link State Power Management and set to Maximum performance, depending on what computer you have.

6. Find Wireless Adapter Settings and set to Maximum performance.

7. Reboot your computer and retest.

If this troubleshooting doesn't work, please follow the steps in the next link:

https://windowsreport.com/driver-power-state-fa...

____________________________________________________________

Note: This is a non-Microsoft website. The page appears to be providing accurate, safe information. Watch out for ads on the site that may advertise products frequently classified as a PUP (Potentially Unwanted Products). Thoroughly research any product advertised
on the site before you decide to download and install it.