Windows 10: "driver verifier dma violation" on bootup following motherboard and CPU replacement. The...

I get a "driver verifier dma violation" BSOD on bootup following motherboard and CPU replacement. After a few seconds, the computer reboots and repeats. The SSD hard drive will boot up on another PC, so I am pretty sure that the drive works.The MB, CPU, Video card, & memory are all new.I am using an ASROCK Z590 MB with an Intel I9-11900K CPU

:)

 

DRIVER VERIFIER DMA VIOLATION

Hi Steven. I'm Greg, an installation specialist, 10 years Windows MVP, and Volunteer Moderator here to help you.

See fixes for the error here:

https://www.howto-connect.com/fix-driver-verifi...

https://www.thewindowsclub.com/driver-verifier-...

https://windowsreport.com/driver-verifier-dma-v... (avoid ad links)



Repair Office in Settings > Apps > Apps & Features > Microsoft Office > Advanced Options > Modify > Repair.

See also repairs here:

https://www.groovypost.com/howto/repair-microso...

https://support.office.com/en-gb/article/repair...

I hope this helps. Feel free to ask back any questions and keep me posted. If you will wait to choose if I resolved your problem, I will keep working with you until it's resolved.

________________________________________________________

Standard Disclaimer: There are links to non-Microsoft websites. The pages appear to be providing accurate, safe information. Watch out for ads on the sites that may advertise products frequently classified as a PUP (Potentially Unwanted Products). Thoroughly
research any product advertised on the sites before you decide to download and install it.

 

DRIVER VERIFIER DMA VIOLATION

HI! There are times that when I open word or excel, my computer will say that my windows insider build ran into a problem. On the bottom, it shows the DRIVER VERIFIER DMA VIOLATION. What is the main problem with my computer? and how can I fix it?

 

Driver verifier dma violation thunderbolt 3 windows 10 crash

Hi,

I have been having a very annoying problem with my studio computer.

Each time I connect a thunderbolt 3 device the computer crashes immediately with a blue screen and "Driver verifier DMA violation".

Here is what I tried so far:

Removed drives from both the device manager and the "programs" on windows 10 (the system is fully updated).

Downloaded and installed the latest Gigabyte TB3 drivers for the motherboard from the company website (Gigabyte z390 designare). I also updated the bios to the latest version.

Still the same issue every time (there is also a horrible noise like an electrical noise).

Any ideas on how to resolve this? (this used to work but maybe some driver/MS update broke it)

Id