Windows 10: driver verifier test

i ran the driver verifyer test and i been getting some error messages Ndis.sysDxgmms2.sysNvwgf2umx.dll pls help

:)

 

Driver Verifier BSOD on Start Up DRIVER_VERIFIER_DETECTED_VIOLATION

Update

So the PC went down the same road, became unusable and I wiped it.

Clean install number 6. Clean install 5 was to test if Windows 7 was as unstable as the Windows 10 installs. It was - this made me think it may be a hardware problem or just a really poorly supported motherboard.

Clean install 6 - this time I am being methodical in my steps and testing every step of the way. PC specs are still the same other than a new stick of DDR4. What I have done so far:

• Bought/installed a new stick of DDR4 for testing.
• Followed Gerrys advice and installed latest BIOS, even though it is in beta it is listed as a stable release.
  
• Installed Windows 10
• Installed Chipset Drivers from Gigabyte website.
• Installed latest Ethernet drivers (20_7) from Intel website.
• I have made sure to not connect the PC to the internet and have left the ethernet cable unplugged.
• Ran Verifier, rebooted with no problems, not that I was expecting there to be any.
• Installed latest drivers from Nvidia
• ran Verifier, rebooted, BSOD "DRIVER_VERIFIER_DETECTED_VIOLATION"
• booted into safe mode, reset Verifier, rebooted.

So this is where I am at. A completely clean install, and what seems to be problems with Nvidia drivers.

Minidump link if someone could have a look. Minidump is 021216-2203-01

https://onedrive.live.com/redir?resid=3789DDEF7B6D41D2!15823

So I am not sure what this means. PC seems stable at the moment though there is hardly anything installed on it.

Does Verifier reporting a problem mean that there is one? What should I do from here?

 

Overclocking / Undervolting guide for Vega 56 or 64?

Here's a quick laundry list:

List of software to use for overclocking and testing
Examples:
Wattman (and how to find and use it, like an overview, including profiles)
Unigine Valley or Heaven (use this for quick testing while changing settings in Wattman and checking for stability / artifacts) ...just suggesting this
How to monitor cores / mem speeds and temps during testing (I've seen screen overlays, and others using GPUz)

Step-by step overclocking in Wattman
Fan speeds
Power limit
Temp limit
Voltages
Core speeds
Memory speeds

 

 DRIVER VERIFIER

Disable driver verifier and upload a new zip after another crash has occured, assuming another crash occurs.

To disable driver verifier:

• Open an admin command prompt
• Enter "verifier/reset" (without quotes)