Windows 10: DRIVER_IRQL_NOT_LESS_OR_EQUAL d1

Hi,Just today I started to get this BSOD while trying to open GTA V. Now the computer also does a disk check on every start up, and I have no idea what the culprit could be. There was no change to any drivers etc. since yesterday.DumpRIVER_IRQL_NOT_LESS_OR_EQUAL d1An attempt was made to access a pageable or completely invalid address at aninterrupt request level IRQL that is too high. This is usuallycaused by drivers using improper addresses.If kernel debugger is available get stack backtrace.Arguments:Arg1: 0000000000000000, memory referencedArg2: 0000000000000006, IRQL

:)

 

driver_irql_not_less_or_equal (d1) (nvlddmkm.sys)


Hi


When I play demanding games I can get a bsod, the latest game being Rise of the Tomb Raider. This is the first game that bsods within 10 minutes no matter what. And so far this is what I can read out of the .dmp files : "driver_irql_not_less_or_equal (d1)" - (nvlddmkm.sys).

What happens is: without warning or fps drop the screen goes black (disconnects). Then the sound goes on for a bit, before it's cut goes into a loop. Then the PC restarts, or I have to push the restart button.
I have used the Display Driver Uninstaller 15.7.4.0 and reinstalled the Nvidia driver. Daemon tools have also been removed. Have stopped the Nvidia streamer service through msconfig too, just to see if it helped. No luck with any of the "fixes". I have run Furmark test without any issues, and a "sfc/ scannow". I've been monitoring the CPU and GPU temp before the crash, but no spikes in temperature.
*Side note - If I run Intel extreme tuning utility CPU stress test, the CPU reach almost 100 C in about 3 min. But that's under 100% load. But I guess that's unrelated, since the CPU don't get that load or temp during games. Still a indicator that something is wrong. And the Intel Diagnostic tool tells me there is something wrong with CPU Freq (Module - CPUFreq.exe did not create a results file.) , and it does not pass the stress test there as well. But I can't find anything about that in the .dmp file.


I'm not experienced enough to understand the rest. But so far by comparing similar problems others have had, I understand that Rise of the Tomb Raider are sending an invalid call/path to the Nvidia driver and makes it crash. correct me if i'm wrong.

Any tips on what to do?

---

ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+4d5acf )

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 00000000004e7d75, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff800133d5acf, address which referenced memory

 

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)

Hello, Ben Vu



Welcome to the Microsoft Community



Thank you for your feedback. I have analyzed the blue screen log you provided.



According to the analysis of the memory dump file provided, the system encountered a blue screen of death (BSOD) when performing certain operations, and the error code is DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1). This error is usually caused by the driver trying to access an invalid or paged memory address at a high priority interrupt request level (IRQL).



The modules with problems are "kbdclass.sys" and "HKKbdFltr.sys".



HKKbdFltr.sys may be a third-party keyboard filter driver, which may conflict or have compatibility issues with the system's keyboard driver (kbdclass.sys).



Based on the above analysis, you can try the following methods.



1. Try to update all related drivers, especially the keyboard driver. You can go to the keyboard manufacturer's website to download the latest driver and install it.

If HKKbdFltr.sys is a driver for a specific software or hardware, try updating or uninstalling the software/hardware driver.



2. If you have any keyboard-related third-party software installed (such as keyboard macro tools, keyboard enhancement tools, etc.), try uninstalling these software and see if the problem is solved.



I hope this information helps. If you have any questions, please let me know and I will be happy to help you further.



Best regards

Brian - Microsoft Community Support Specialist

 

Getting constant crashes with this message "DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)"

Recently I started getting crashes on my PC with message "DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)".
Here is a link with dump files created. As I understand, there is some problems with drivers but I cant figure which one. Please help!

Pc specs:
MOBO: Gigabyte X670 GAMING X AX V2

Processor: AMD ryzen 7 7800x3d
Graphic: Nvidia RTX 4700 Super OC
Ram: Kingstone Fury Beast DDR5 2x16gb 6000mhz

links:

DUMP FILES – Google Drive