Windows 10: DRIVER_OVERRAN_STACK_BUFFER while in Windows Setup, trying to reset PC.

I have been recently having my computer freeze on the loading screen, and always BsoD-ing. I tried to use my media to reset my computer, but it blue screened in Windows Setup while copying files, I reset my disk already, both of them, and I don't know what to do. Can anyone help?

:)

 

Daily "DRIVER_OVERRAN_STACK_BUFFER" BSODs on Windows 10

Thank you for getting back to us with the information.

We apologize for the delay as we are checking in your case thoroughly.

Since the suggested methods above did not change anything, we suggest that you check the resolution provided in this link below. This article contains troubleshooting steps specifically for the error code
"DRIVER_OVERRAN_STACK_BUFFER". See the link below:

Bug Check 0xF7: DRIVER_OVERRAN_STACK_BUFFER

Let us know how things go so we can further assist you.

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

1070 Overheat Crash x(

Yes try it again... lol... we were waiting for that!

You have steps listed....try to find a another pc to try...try to reset the bios and see if that for some reason would help. But yes, try putting it back in. If not, id say rma time.