Windows 10: DRIVER_POWER_STATE_FAILURE

I run a windows 11 and this has been happening prior to upgrading it from windows 10. It happens after I switch my laptop back on and successfully opens the desktop, only to crash and show up "DRIVER_POWER_STATE_FAILURE". I've secured my charger and they are well intact, both ends of it. I tried to unplug the charger after shutting it down and also tried leaving them plugged after shutting it down but it just keeps on happening only once after I switch the laptop on. After the crash, it doesn't show up anymore, only until I shut it off and switch it back on. The crash only happens frequently,

:)

 

Windows 10 BSOD - DRIVER_POWER_STATE_FAILURE

Hi,



Thank you for writing to Microsoft Community Forums.



I understand that you are receiving Blue Screen error with DRIVER_POWER_STATE_FAILURE on your computer. I’ll certainly assist you with the issue.



However, please let us know:

• When exactly do you receive the Blue Screen error?
  
• Are you aware of any changes made to the computer recently?
  
• Which build version of Windows 10 is installed on the computer? To check type:
  winver in the search bar on the Taskbar and hit
  Enter.
  
• What is the make and model of the computer?
  

I have tried to access the link for dump files shared by you. However, I was unable to access the link. I would suggest you to upload the files in OneDrive and share the link.



The DRIVER_POWER_STATE_FAILURE error occurs when the driver is in an inconsistent or invalid power state. You may want to refer the troubleshooting steps mentioned in the Remarks section of the
article Bug Check 0x9F: DRIVER_POWER_STATE_FAILURE
and see if that helps.



Note: Modifying BIOS/ complementary metal oxide semiconductor (CMOS) settings incorrectly can cause serious problems that may prevent your computer from booting properly. Microsoft cannot guarantee that any problems resulting
from the configuring of BIOS/CMOS settings can be solved. Modifications of the settings are at your own risk.



You may also want to refer the steps mentioned in the article Troubleshoot
blue screen errors.



We await your response.



Regards,

Nikhar Khare

Microsoft Community - Moderator

 

recurring Driver_power_state_failure with Windows 10

Latest update #2: bad news! Driver_power_state_failure error occurred again yesterday, so the latest nVidia driver update does not appear to have been the solution. So I shifted my focus to ZigZags suggestion to update the NW1900.sys driver, but I cannot
find an update anywhere online. My PC display driver is provided by NextWindow, but I think they are no longer in business. I have version 1.4.0.0, which was released in 2012-5-17. Any suggestions.

 

BSOD when running on battery - driver_power_state_failure

***Merged***

Hello,

Since a few months my laptop - MSI GS60 2PE running Windows 10 Home - started giving BSOD's with the DRIVER_POWER_STATE_FAILURE after a seemingly random time when running on the battery. As I'm using it every day for work,
I depend on the machine and managed by just plugging it in.

While that works, I know it should be possible to make it work on the battery...

I've recently "reset this pc" using the build in option in Windows 10, after which I installed all "latest" drivers from the MSI site. I also re-installed all programs required to do my job and play some games.

Yesterday, Windows wanted to install the Fall Creators Update: I did. Booting the laptop while unplugged now gave me another BSOD, though with a different message: VIDEO_DXGKRNL_FATAL_ERROR. This seems to point to the Intel HD 4600 or Nvidia
GTX 870M.

To sum up some other issues I was starting out with...

Syptoms

• When unplugged, a BSOD occurs after a seemingly random time. (driver_power_state_failure)
  • After updating to the fall creators version, it also throws video_dxgkrnl_fatal_error; feels like a coin flip which one it will show.
    
• Bluetooth was failing after a couple of minutes, regardless whether I used it or not and whether the laptop was plugged in or not.
  
• Shutting down Windows would sometimes just heat up the CPU, make the fan go haywire and do nothing but turning the screen off.

I've tried / did:

• All drivers are up to date. This was verified by using DriverView and manually going over all of the non-Microsoft drivers.
  • This step fixed symptom 2 described above. Next to the latest version there was some patch (or 3 major versions ago) that couldn't be removed by conventional means. The build in troubleshooter actually removed it and bluetooth is now working
    as it should.
  • The HD4600 drivers were removed from the device management and I installed the latest according to the Intel site.
  • DDU was used in safe mode to remove the Nvidia driver and the latest one was installed.
• BlueScreenViewer shows the minidumps and lots of drivers.
  
  • The one created when the driver_power_state_failure occurred is useless, as nothing is marked but the ntoskrnl.
  • The one created when the video_dxgkrnl_fatal_error occurred shows ntoskrnl, watchdog and dxgkrnl.
    
• A clean boot (disabling all non-Microsoft services and disabling all startup programs) still results in the BSOD.
  
• Booting the laptop while plugged in, letting it run for a couple of minutes so everything is started and then unplugging it also seems to work.
  • Yesterday, I unplugged it and could work with it for about 2.5 hours before it called out for power: I doubt the battery is the issue.
  • I was asked to run a battery check (powercfg -energy -output ...) but that doesn't seem to show any issues. (design capacity '55031' Last full
    charge '38556'. The laptop is over three years old.)
    
• Starting in safe mode with networking will not result in a BSOD. (At least not within the hour I left it on.)
  
• Unchecking 'turn on fast startup' - as suggested in so many posts - in the power settings only causes issues.
  • When unchecked, windows won't shut down properly.
  • When checked, it does shut down normally. This seems to be the
    fix for symptom 3.
    
• Running various Windows troubleshooters didn't do much. Only the 'Windows Update' said it had some fixes regarding the database and 'fixed' it.
  
• The bios is up to date. (Version E16H2IMS.112)

Any help would be welcome.

Cheers!

PS: yes this post looks a lot like my
previous post, but that was marked answered because a moderator thinks all checks suggested can be performed within three days, next to a daily routine.