Windows 10: Drives

I have a Windows 10 HP computer. It has a c NTFS drive with 100 GB, d RW drive e NTFS drive with 600 GB, and a z drive fat 32 with 40 MB. I don't know what the z drive is. I want to merge the c and e drives, but the z drive interferes. Since I got this computer from someone else, I don't know how the z drive might have been used.

:)

 

Hard drive/ OS issue

a guy suggested :

• shutdown
• unhooked HDD
• restarted
• yay !!
• reconnected HDD
• restarted
• yay !!

also , try method 3
How do I unlock the drive where Windows 10 is installed?

 

Suggestions for Maps/Drive

Some more suggestions



- When you set a destination in drive, you should be able to set an address which is existing in the contact list

- You should be able to view all step by step navigations. right now you are not able to see complete direction steps.

 

Overclock your hard drive!!!

Heres a much easier hack that I realized quite a few years ago that really does work!

REQUIREMENTS:

• Hard drive with molex power connection.
• PSU with more than 1 strand that has molex plugs on it.
• Wire strippers, soldering iron if you're fancy, electrical tape if you're not.

STEPS:

• Take the strand of connectors from your PSU, and decide which one will be the donator for this overclocking adventure.
• Cut the yellow and orange cables, then twist them together.
• Find the power connector you've chosen as the overclocking connector, and release the orange cable from the connector. Now use your preferred method to bind them together, then place it back together.
• Plug in a drive and feel the speed!

Congratulations! You've just overclocked your hard drive!