Windows 10: Dvd not showing boot menu

I want to install win10 using dvd but not showing in boot menu

:)

 

Can't boot from DVD drive

Is your controller in RAID/AHCI modes? If so, the DVD drive will be listed as a separate device in the list of available boot devices, not as "CDROM". Remember that when setting boot device priority. Otherwise, read the manual to see which hotkey during POST brings up the boot menu that lets you select which device to boot from. Even here, the drive will be listed separately, and not as "CDROM".

 

booting from dvd

Having an Asus BIOS you should have a menu item that says BOOT, near the bottom should be a boot order...highlight the DVD drive and press PGUP until it is at the top of the list...at least that's how my Asus Z87 Pro bios works.

You should also refer to the manual for your mainboard as it should have a section dedicated to navigating your bios and where to find things within it.

 

No startup boot menu

Hello Kimoefat,

Thank you for posting your concern in Microsoft Community and welcome to the Windows 10 Family.

As an initial recommendation, I would suggest you to access the System configuration utility and check if the Operating System installation path for Ubuntu exists. To do so, follow the below steps.

• Type msconfig in the search bar and select System Configuration from the search results.
• Select the boot tab in the System configuration console to check if the installation path for Ubuntu exists.

If it exists, next logical step is to check if the boot menu time out has been set to 0, which results in Boot menu not showing up.

The boot menu time-out determines how long the boot menu is displayed before the default boot entry is loaded. It is calibrated in seconds. To change the boot menu time-out, use the Bootcfg
/timeout switch. Valid values are from 0 through 999. You cannot use Bootcfg to set an indefinite time-out.

You can run the following Run command line to set the boot menu time-out accordingly. To do so, follow the below steps.

• 
  Press Windows key + X, select
  Command prompt (Admin) to bring up elevated Command prompt
  
• 
  Type in the following command: bootcfg /timeout 10
  
  timeout 10 will set the time frame to 10 seconds
  

However, if the Boot path for Ubuntu does not exist in the boot menu of System Configuration utility, I would suggest you to check if the Ubuntu is overridden by the Windows installation or if the Ubuntu installation files are corrupted.

Hope the above information is helpful. If you need further information, feel free to write to us and we would be happy to help you.

Thank You.