Windows 10: Edit boot options

Edit windows boot options for :windows 10Path.:\windows\system32\winload.efiPartition :{474e8aea-e0b9-4c49-a7d6-8532b91e05e5}Hard disk :{13c2cb9b-c9f5-4066-a960-e8a8d3a2025d}[/NOEXECUTE=OPTIN/NOVGAWHAT SHOULD I DO?

:)

 

Re: All boot options are tried...

Hi Elda,

If the boot sequence didn't work, then we suggest try running the laptop in safe mode. To do this, here's a few steps to follow:

• Power down your laptop.
• Turn it back on again.
• When you turn it back on, press F8 repeatedly until the power on option appeared.
  
• If you see the boot option "Safe Mode with Networking", choose that option.
• See if you can boot up in Safe mode.

We'll look forward to your response.

 

laptop doesnt boot automatically

This is what happened.

1. Did a repair install and later disabled hibertnate in CMD.
2. Enabled legacy option ROM in BIOS.
3. After a few times startup ( i used the system in such mode for 5 days), changed boot option back to default.
4. Vola!! It boots automatically to win10 without any keypress. Tested it with many starts to confirm the same.
5. Re-enabled hibernate option using CMD and later selected Fast Startup.
6. System booted normally, without the need for any keypress.

I do not know exactly whether such steps resolved the problem or what else happened, hence cannot suggest above steps.

Many thanks to all members who helped to troubleshoot problems.

 

Edit boot options.

Hi,

Thank you for posting your query in Microsoft Community.

I understand your concern and will assist you to resolve this issue.

I suggest you to follow the steps below and check if it helps.

Steps1: Try to perform Automatic Repair in Windows recovery tool that can fix certain system problems that might prevent Windows from starting. Automatic Repair scans your computer
for the problem and then tries to fix it so your computer can start correctly. Download a Windows 10 ISO in DVD or USB.

a) After you boot your computer using Windows DVD or System Repair Disc, a black screen appears with gray text "Press any key to boot from CD or DVD". Press any key.

b) Select the correct time and Keyboard type.

c) Click Repair your computer in the lower left corner.

d) Select Troubleshoot from Choose an option screen.

e) Click advanced options in Troubleshoot screen.

f) Select Automatic repair.

Step 2: If the issue persists, run the following commands from the command prompt of the Windows Recovery.

a) Refer to the Steps a to e in Step:1.

b) In 'Choose a recovery tool' window, select
Command Prompt.

Insert the installation media and see if the following suggestion helps, if any how the boot manager is missing (although chances are less).

Follow the path: Trouble Shoot >
Advanced Options >Command Prompt

Enter the following command line to check the disk partition for errors: chkdsk/f /r X drive letter)

Try using the following command lines to rebuild the BCD store in command prompt and see if it helps.

bootrec /scanos

bootrec /rebuildbcd

bootrec /fixmbr

bootrec /fixboot

You can download Windows 10 ISO refer the link below.

Download Windows 10

Hope this information helps. Reply to the post with updated status of the issue so that we can assist you further.