Windows 10: Edit Videos on USB stick dont work

Hi i bought a SanDisk 3.2Gen1 USB stick to store video clips on it, i always edit cut the important part out of the 5min clip them after with just Microsoft Photos so i just play the Video and click on "cut" in the lower right corner. It always worked fine but after i bought the stick and put all my Videos on there it no longer works.I tried to find something on the internet but i found nothing about this and the solutions to the Error code 0x80070057 didnt work.so i hope someone can help me here with this.Its german and says something like: "Please try again. If the problem persists, visi

:)

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk

 

USB stick previously used as a boot stick for Killdisk not recognized

Try method 2 under Windows 7 8 10 here:
Free to Remove Readonly Attribute in Windows

Method 2: Clear readonly status with Diskpart

In Windows 10, 8, 7 OS, you are also able to run Diskpart in Command Prompt to clear read-only attribute on any partition on your computer. You can follow the tutorial below:

Step 1. Open Command Line and type Diskpart
Step 2. Type list disk
Step 3. Type select disk (disk number)
Step 4. Type attributes disk clear readonly





Then try Clean

 

Build USB Stick with Custom Windows 10

If your intention is to use the USB stick to deploy your captured Windows 10 image to another machine, simply boot your VirtualBox vm with Macrium Rescue ISO and create a system image storing it to your USB stick.

To deploy it, boot any real physical or virtual machine with Macrium Rescue boot disk or ISO and restore the image. The second video in tutorial you mentioned shows exactly what to do, step by step, from capturing the image to deploying it.

If your intention is to create WindowsToGo USB, a bootable Windows USB stick, please read this Microsoft TechNet article: Windows To Go: Feature Overview