Windows 10: Emmm. Please help. Is this dead or no. (i do not have usb or cd)

submitted by /u/edik9
[link] [comments]

:)

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk

 

HD 5870 Bios flash failed

mp3 player is in FAT / FAT32 format ?

Set Boot up first to the drive with hiren bootcd 10.4
Done...

the options will pop out after loading the disc choose

boot cd

then the list (step by step)

Next...
Dos....
USB Drivers....
Load USB Drivers with no386.....

Ask you load cd drivers. NO
Ask you load SCSI drivers. NO
Ask you anything NO.
USB driver list comes out. 8 Don't choose anything else.

type
C:\ (that should be your mp3 player if you did it right)

atiflash -i
to list the adapters

atiflash -p -f 0 ???.bin

done.........

 

Windows 10 help CD/DVDR

Hi,

Thank you for being a part of Windows 10.

Before we proceed, I need more information to help you better.

• 
  Which CD burner you are referring to? Is it Windows Media Player CD burner?
  
• 
  Have you made any changes to your system prior to this issue?
  

Try the following methods and check if it helps:

Method 1:

If you are referring to Windows Media Player then, I suggest you to run the Windows Media Player Settings.

Follow the below steps:

1. Type troubleshooting in the search bar.

2. Select Troubleshooting.

3. Select View all on the top left corner.

4. Click on Windows Media Player Settings.

5. Follow the on-screen instructions to run the troubleshooter.

If the issue persists then follow the below method.

Method 2:

I suggest you to start the Shell Hardware detection service.

Follow the below steps:

• Press Windows key + R from the Keyboard.
• Type services.msc and hit Enter.
• In the Services Window, look for Shell Hardware detection service and
  Stop it.
• Restart the computer and Start the Shell Hardware detection
  service and set it to Automatic.
• Restart the computer and check if it works.

Method 3:

Step 1:

I would recommend you to manually update
DVD/CD-ROM driver from the Device Manager.

Please refer to the following Wiki article created by Andre Da Costa on
How to: Install and Update drivers in Windows 10.

How to: Install and Update Hardware Drivers in Windows 10

Step 2:

I suggest you to uninstall the DVD/CD-ROM driver from the Device Manager and check.

Follow the steps to uninstall the driver.

• 
  Right click on Start button and click on Device Manager.
  
• 
  Search for DVD/CD-ROM driver and expand it.
  
• 
  Right click the device, and click Uninstall.
  
• 
  Restart the computer.
  
• 
  Right click your computer name in Device Manager and click
  Scan for hardware changes. Device manager scans your system and automatically reinstalls your device.
  

Hope the above information helps. Reply with necessary information and the result to help you further.

Thank you.