Windows 10: enable updates win 11

Enable windows 11 updates

:)

 

Intel Readies P55 Chipset B3 Stepping Update

Intel's is readying a hardware update for its P55 Express chipset, currently the only core-logic for the company's brand new socket LGA-1156 processor platform. The new B3 stepping of the P55 PCH will bring with it a little more than new MM number and S-spec numbers. A list of changes is as follows:

• New MM number and S-spec numbers for the converted products;
• Firmware and minor BIOS updates are required with the conversion;
• Processor MRC/microcode update required to enable future processors;
• Recommended storage driver upgrade from Intel MSM 8.9 to Intel RST 9.5.

Although it is listed that the MRC update enables 'future processors', Intel, in a statement issued to X-bit labs assured that the current B2 stepping of the chipset (found on current socket LGA-1156 motherboards) does not leave out support for any of Intel's new LGA-1156 processors that are slated for release in the very near future. The dual-core "Clarkale" 32 nm processor will be supported by both B2 and B3 steppings of the chipset.

P55 B3 stepping is pin-identical to P55 B2, and hence motherboard vendors will not have to come up with new designs. Sampling of the new stepping began as early as on October 02, 2009, and it is scheduled for shipment to manufacturers by the 7th of December, 2009. P55 is the performance core-logic for the LGA-1156 platform. It supports Core i5 and Core i7 "Lynnfield" processors with discrete graphics.

Source: X-bit labs

 

geforce experience takes an age to load..

Well that's why I asked. Mine is on SSD and takes 11 seconds. Your list of games will not appear if it has not checkd for updated suggested settings for awhile until it checks.

When it says it is refreshing the game list, it is checking, because NVIDIA periodically updates suggested settings. Plus it will look for those for new games you have installed.

So, the less it is run, the slower it will be.

 

win 11 22h2 update printer issue

This worked perfectly. Thank you very much.

Win 11 22H2 Pro was host, Win 10 clients was having error connecting with 0x00000709. Doing the additional steps you mentioned resolved the entire problem even though RPC was enabled at first.