Windows 10: EpsonNet Printer port error in windows 11 Pro 22621.963

This post involves an Epson Eco-Tank ET-4750 printer and the latest Epson printer drivers v2.68.02, though the issue may very well effect other printer brands and models that use similar connection methods.first off, I have confirmed that the issue is not with the printer hardware or the connection method. i am able to print normally using android and IOS devices. it seems to be only windows that is affected. normally when the printer drivers are installed using the combo package installer, three printer deviced are installed as well as a printer port if the printer is being accessed over a

:)

 

Windows 10 Home Won't Print to Remote Printer


I have three computers.
Machine 1: Windows 10 pro, has the USB Brother HL-5040 printer
Machine 2: Windows 10 pro, prints OK to the remote printer.
Machine 3: Windows 10 home, Used to print, but not anymore (THIS IS THE PROBLEM).
I’ve tried everything that I can think of, and would appreciate any suggestions.
I did these steps on Machine 3 that did not work.

1. Remove the printer device.
2. Add a Printer
3. The printer that I want isn’t listed
4. Select a shared printer by name
5. Browse
6. Select the displayed Machine 1.
7. Select the displayed Printer.
8. Next
9. Failure “Connect to Printer”.
10. Add a printer using a TCP/IP address or Hostname
11. Next
12. Set Hostname to Machine 2, and set port name.
13. Detecting TCP/IP Port
14. Additional Port information required.
15. Device Type – Standard, Brother Port Server
16. Next
17. Detecting the Driver Model
18. Install The Print Driver
19. Select Brother and Brother HL-5040
20. Next
21. Replace the Current Driver
22. Printer Name (setting it to HL-5040)
23. Next
24. Do not share this printer
25. Next
26. You’ve successfully added “HL-5040”
27. Finish

Printing on Machine 3 puts the document in the print queue, which reports error printing.
Printing from Machine 2 to the printer on Machine 1 works perfectly.
All three machines are in the same HomeGroup. Machine 3 can access the shared files from Machine 1.

 

Can't share printer—getting error message

Step 1: Go to store.
Step 2: Buy a less shitty printer.
Step 3: Pick up some beer while you are there.
Step 4: Enjoy both your new printer and your beer.

In all seriousness, I have had more issues with Lexmark printers and their shitty drivers then any other manufacturer, HP is a close second though.

However, if you don't want to get a new printer*Laugh :laugh:, and I can understand that, when my Lexmark was giving me the same troubles in Win7(and Vista) I had to make sure the Windows firewall was ON and the firewall service was enabled and running. After I shared it I could re-disable the firewall and firewall services.

 

HP Deskjet 9300 printer on Win 7 or Win 8.1

But it does ask you to connect the printer

Step Two
11. Connect the USB cable to the product, and connect the USB cable to the computer. A Device driver software was not successfully installed window opens.

Step three:
3. Click the drop down menu, and then change the port from LPT1 to USB or DOT4.virtual

If you connect the printer in Step two #11 then maybe when you get to Step three #3 there will be USB port in the list.