Windows 10: Error 0x8078012D and 0x8007045D when trying to create a system image

Discus and support Error 0x8078012D and 0x8007045D when trying to create a system image in Windows 10 Backup and Restore to solve the problem; I'm having so many problems with Windows 10. For months, Windows 10 Update Assistant has been bugging me with error 0x8007007e, constantly failing.... Discussion in 'Windows 10 Backup and Restore' started by LifeMushroom, Feb 5, 2018.

  1. Error 0x8078012D and 0x8007045D when trying to create a system image


    I'm having so many problems with Windows 10.
    For months, Windows 10 Update Assistant has been bugging me with error 0x8007007e, constantly failing. Some people recommended me to update through the ISO instead, so I began to create a backup.
    I'm using an external hard drive (Seagate Expansion Drive) to create a system image. I tried it, and I got:
    The backup failed.
    The operation failed due to a device error encountered with either the sources or the destination. If the source ordestination volume is on a disk, run CHKDSK/R on the source or destination volume, and the retry the operation.
    (0x8078012D)

    Additional information:
    The request could not be preformed because of an I/O device error. (0x8007045D)
    So I looked online and tried to run sfc /scannow from a elevated cmd on the external drive and I get: Windows Resource Protection could not start. This happens even after I do 'net start trustedinstaller' and that works.
    I'm at a loss on what to do on how to create a system image, what do I do now? Nothing is working.

    :)
     
    LifeMushroom, Feb 5, 2018
    #1
  2. Erika Aro Win User

    0x8078012D and 0x8007045D Backup errors

    Hi Jeff,

    The error codes 0x8078012D and 0x8007045D you are experiencing with the backup feature in Windows may be caused by several factors. These include the drives (HDD) that you are using, the antivirus software running in the background or corruption in the Windows
    operating system. At this point, please answer the questions below so we can better assist you:

    • When does the errors appear: during the backup process, starting the backup process, or when retrieving the image files?
    • To avoid repetition, can you provide us with all the troubleshooting steps that you've done so far?
    • Can you send a screenshot of the error messages if there are any?
     
    Erika Aro, Feb 5, 2018
    #2
  3. BigT1965 Win User
    Error when trying to create a System Image in Windows 10 (0X80070716)

    When I click "System Image Backup" on the File History screen I get this error message.

    An Internal Error Has Occurred

    The specified resource name cannot be found in the image file. (0X80070716)

    I have another computer with Win 10 and it does not return this error.

    Does anyone know how I can fix this? or where to look for possible suggestions.
     
    BigT1965, Feb 5, 2018
    #3
  4. Error 0x8078012D and 0x8007045D when trying to create a system image

    Running chkdsk/r on the external drive:

    Stage 4: Looking for bad clusters in user file data ... A disk read error occurredc0000185The disk does not have enough space to replace bad clustersdetected in file 19578 of name . An unspecified error occurred (6e74667363686b2e af6).
     
    LifeMushroom, Feb 5, 2018
    #4
  5. Hi LifeMushroom. Welcome to the TenForums @LifeMushroom

    Have you got another disk to run backup too?

    Not sure what you are using to make Image, I would recommend Macrium Reflect once you checked drive.

    Backup and Restore with Macrium Reflect

    If you follow this process this will perform an in place repair / upgrade.

    Repair Install Windows 10 with an In-place Upgrade

    At a minimum I recommend a backup of personal data.

    I did not look up your error codes. If the in place repair / upgrade does not work post back. It might be time to consider a clean install. Yes more work but it provides a good go forward base.

    You may also be able to use DISM to repair your current installation.

    Use DISM to Repair Windows 10 Image

    Myself I would go clean. We have a tutorial for that as well.

    A little ahead of ourselves. Check your drive and run the in place / update. It will take you to V1709, FYI.
     
    Caledon Ken, Feb 5, 2018
    #5
  6. I don't have another external drive and I'm using the Backup and Restore (Windows 7) tool.
    So backing up files with that tool and then reinstalling the computer would be the best option?
     
    LifeMushroom, Feb 5, 2018
    #6
  7. Macrium is very reliable and it is free. Once installed you create Macrium boot media, which you need to have.

    That said you can't backup to a problematic drive.

    Clean install provides the best base in my opinion. It is more work as you have to re-install everything. Browser, tools, video viewers etc.

    You could also use the reset options in Advance Startup Options

    Boot to Advanced Startup Options in Windows 10

    These can overwrite existing data so you need at a minimum a data backup. It would also be good to have boot media just in case. The in place repair / upgrade process will provide you with that. Just make a USB key, need an 8GB key. Since you have Windows 10 on device it will activate on the re-install, one license you don't have to find.

    Whether you clean install or reset, locate any software licenses you own.

    Here is the clean install tutorial.

    Clean Install Windows 10

    Your posting hasn't been up long and other members could have a different approach.


    Ken
     
    Caledon Ken, Feb 5, 2018
    #7
  8. simrick Win User

    Error 0x8078012D and 0x8007045D when trying to create a system image

    Hi.
    This sounds to me as if your external disk is going bad, and therefore your backup failed. A few things:

    1. Windows backup and restore is being deprecated, so you should be using a 3rd-party program, like Macrium Reflect (as Ken suggested).
    2. Nothing, no program will be able to make a backup to a failing drive.

    Please download Crystal Disk Info (free) and post a screen shot here of the details for the external drive
    CrystalDiskInfo Crystal Dew World
     
    simrick, Feb 5, 2018
    #8
  9. Hello,
    here are the screenshots.
    Snaggy - easy screenshots
    Snaggy - easy screenshots
    Snaggy - easy screenshots
     
    LifeMushroom, Feb 5, 2018
    #9
  10. simrick Win User
    Thanks.
    How full is the external drive? Do you have data on it right now, or is it empty?

    Your Read Error Rate is a critical attribute. It can indicate that the magnetic media inside can no longer reliably store information in the affected sector(s).

    I'd like you to install Hard Disk Sentinel (they have a 30-day free trial for Windows), and run the Surface Test on the external drive - see what that reports. Then, another CHKDSK /r on the external drive from an admin command prompt.
    Hard Disk Sentinel - HDD health and temperature monitoring

    You also may want to try a different USB cable, in case the one you're using is the problem. Also, possibly a different USB port on the computer (not a USB hub).

    It also wouldn't hurt to run SFC /SCANNOW on the Operating System drive (from an admin command prompt).

    Then install Macrium Reflect Free and try to make an image of your OS drive to the external drive. Let's see if you get any errors using that, and what they may be.

    Macrium Software | Macrium Reflect Free

    And here's how to use the Macrium software:
    Backup and Restore with Macrium Reflect Backup Restore Tutorials

    .
     
    simrick, Feb 5, 2018
    #10
  11. The drive is mostly empty, though there's some data. I can see the breakdown later.
    I'll try what you said later as well. But whenever I try sfc /scannow I always get "Windows Resource Protection could not start the repair service.". I've searched this up and tried everything online but nothing works.
     
    LifeMushroom, Feb 5, 2018
    #11
  12. simrick Win User
    SFC /SCANNOW is a system file checker. Your system files reside on your Operating System drive (normally C). I thought you said you tried to run it on your external drive? You'd want to run CHKDSK /r on your external drive (and the surface scan).


    Error 0x8078012D and 0x8007045D when trying to create a system image [​IMG]
     
    simrick, Feb 5, 2018
    #12
  13. Error 0x8078012D and 0x8007045D when trying to create a system image

    Running sfc /scannow always gives me an error when I try it after being in the admin cmd in C:
    Chkdsk on F: used to give me errors, but I'll try running it again after running Hard Disk Sentinel.
     
    LifeMushroom, Feb 5, 2018
    #13
  14. It won't let me use HDS. Snaggy - easy screenshots
    Can you point which zip file to use? I've used 3 already.
     
    LifeMushroom, Feb 5, 2018
    #14
  15. You want this one.


    Error 0x8078012D and 0x8007045D when trying to create a system image [​IMG]


    In section labelled Limited Trial / Free Version
     
    Caledon Ken, Feb 6, 2018
    #15
Thema:

Error 0x8078012D and 0x8007045D when trying to create a system image

Loading...
  1. Error 0x8078012D and 0x8007045D when trying to create a system image - Similar Threads - Error 0x8078012D 0x8007045D

  2. Error 0x8007045d

    in Windows 10 Installation and Upgrade
    Error 0x8007045d: I’m reinstalling windows 10 and I got a error code 0x8007045d so I went into the command prompt and diskpart clean all disk 0 it says I/O error and sometimes disk 0 won’t show. Any help?!?!???...
  3. Create a System Image

    in Windows 10 Installation and Upgrade
    Create a System Image: I have a Dell Latitude E6540 running Windows10. I am trying to create a System Image. I am trying to put it on a external hard drive. I have an older Seagate 500GB hard drive that I put into a Sabrent USB 3.0 3.5" SATA Hard Drive Aluminum Enclosure. I open the control panel...
  4. error when trying to restore a system image backup. It says backup was created with BIOS...

    in Windows 10 Installation and Upgrade
    error when trying to restore a system image backup. It says backup was created with BIOS...: I had a processor fail causing my MBR to be corrupted. I did not have an SRD for this system. I downloaded Windows 10 Pro 64 bit from your site. I have a good backup of the system but version 1809 of Windows will not perform a system image restore. I download windows 10 Pro...
  5. creating repair disc - error 0x8007045d

    in Windows 10 Drivers and Hardware
    creating repair disc - error 0x8007045d: I am just updating my backup protocol and got to the point of creating a new repair disc. I am using my internal dvd drive on my Acer laptop and using Windows 10. Whatever disc I load gets the error code error 0x8007045d. Searching the net I got one article sugesting I...
  6. Error while creating system image

    in Windows 10 Installation and Upgrade
    Error while creating system image: Hi! Today, when I tried to create a system image on my empty partition of my newly installed Window 10, I got following error- [ATTACH] Please tell how can I fix this?...
  7. Create a System Image

    in Windows 10 Installation and Upgrade
    Create a System Image: THE RPC SERVER IS UNAVAILABLE. [0x800706BA] How to fix it? https://answers.microsoft.com/en-us/windows/forum/windows_10-update/create-a-system-image/95446696-2248-4748-ae35-8e3c4b340128
  8. Creating a System Image

    in Windows 10 Installation and Upgrade
    Creating a System Image: When I try to create a system immage, it starts then error 0x800706ba appears and it stops https://answers.microsoft.com/en-us/windows/forum/windows_10-update/creating-a-system-image/9877495c-d9a8-47dd-8847-de3fb145c981
  9. Create system image ?

    in Windows 10 Backup and Restore
    Create system image ?: Hi All I try to save a image for my windows , but don't know which files should I include . Should I include "Recovery D" ..? That's the only 1 not check ..? Thanks . [img] 17421
  10. error code: 0x8007045D

    in Windows 10 Support
    error code: 0x8007045D: I just starting getting the following: error code: 0x8007045D when I try and move a folder from one drive to another. I can only find 3rd party programs that claim they work but they all come from sites I've never heard of before or are answers from years ago. Anyone...

Users found this page by searching for:

  1. 0x8078012d windows 10

    ,
  2. 1803 0x800f081e