Windows 10: Error Codde 0xc000098 File: \BCD

Hello, when I go to boot my Samsung Galaxy Book S Verizon if that matters I keep getting an error code as follows:File: \BCDError Code: 0xc0000098I’ve tried running the auto repair, etc. I downloaded the ISO and it won’t detect the USB drive and I see no option to boot from USB. I’ve formatted the drive in hopes of reinstalling Windows 10, but cannot figure out how to do it. Can someone please walk me through this? Thanks!

:)

 

Error 0xc000098

My son's windows surface tablet device has recently completed an update and now we are receiving an error message

Recovery - your PC/Device needs to be repaired. Boot configuration data file etc. - File:/BCD, Error Code: 0xc000098.

Now all we get is a blue screen with this message and thats about it. I can press the windows key for UEFI firmware settings but thats about it!

Help! What do we do to be able to get onto windows again so that we can use this for School!

WHY do microsoft do stupid updates all the time to cause this - work computer realtek sound drops off every time which is a PAIN and now this! Come on Microsoft.

 

BCD File Rebuild and BIOS

Our IT department updated my pc to 1803 not realizing that I have an X299 motherboard and a Samsung NVME SSD boot drive. I came in the next day to get the BCD File error BSOD with error code 0xc000098 (a known bug but not fixed a year after discovery).
Our IT department looked up this issue and decided to rebuild my BCD file and was (we thought) successful implementing this solution. My pc then booted from the previous NVME SSD drive. I had migrated my OS from the 256GB SSD to a new 500gb SSD, both NVME.
No troubles for a year booting from the 500gb disk and now it boots from the old 256gb drive which I did not wipe on purpose. I boot into the UEFI ASUS bios on the pc and the boot order configuration only lists one option for position 1 to 4. Before each position
listed each bootable device. First of all why in the world would a Windows update and BCD file rebuild screw with the BIOS and second how do I get the proper C: drive boot with to way to change the boot order in the BIOS?

 

when i rebuild bcd,run bcdedit /export c:\bcdbackup,An error occurred

an ERROR IS The storage export operation has failed and the system cannot find the specified FILE

because when laptop startup,screen display Not connected or unable to access the required device
Error code 0Xc000000e

but，i run bcdedit /export d:\bcdbackup,The screen shows that the operation was successful

I run these commands step by step

1.bootrec /fixmbr

2.bootrec /fixboot

3.bootsect /nt60 sys

4.bootrec /fixboot

5.bcdedit /export c:\bcdbackup

6.attrib c:\boot\bcd -h -r -s

7.ren c:\boot\bcd bcd.old

8.bootrec /rebuildbcd

An error occurred in the fifth step

i use diskpart and list volume

Disk C is only 260M, Disk H is the system disk, Disk D is a removable disk

so What command should I enter in the fifth step