Windows 10: Error Code : 0x8007025D shown while trying to clean install windows 10 and 11 with media...

So recently ive tried to install windows 10 when I started encountering the error code , tried to reinstall windows 10 on a different usb and it gives the same issues ,I then tried with windows 11 and I'm still getting the same problem. I've tried installing both on all 3 of my storages but have no luck , I've updated bios to latest version ,idk what else to do.Pc specs are as follows 650W gold certified PSU 1*16gb ddr4 36003060 12gb Intel i7 8700k500gb SSD1tb hdd1tb nvme MSI z390 a pro motherboard

:)

 

Error Code : 0x8007025D shown while trying to clean install windows 10


My dell inspiron 15-3521 was windows 8 when i bought. Since then i was upgrading my wndows to 8.1 then to 10. After successfully upgrading it to
windows 10, i wanted to do a clean installation. By following the guide shown in microsoft website, i downlaoded the media creation tool and made a usb bootable pendrive with same version of OS(windows 10 home single language 64bit). But during the installation
process an error was shown just after 8% completion of 'preparing for windows installation'. The error is "Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. Error code: 0x8007025D"
Can any one please tell me to fix this issue?

Thank you in advance.

 

Error Code : 0x8007025D shown while trying to clean install windows 10

Hi,

Thank you for posting your query on Microsoft Community.

I understand that you receive an error when trying to perform a clean installation. We will assist you to resolve the issue.

Please be informed that this issue may arise when the installation disk gets corrupted.

I suggest you to download the latest ISO of Windows 10 and perform the installation once again.

Download Windows 10

Also refer: Redirecting

Hope the information helps. Let us know if you need further assistance. We will be happy to help.

Thank you.

 

Error Code : 0x8007025D shown while trying to clean install windows 10

STILL GETTING THIS ERROR?
I believe I have solved the problem. I attempted a fresh installation of Windows 10 on to my brand new "OCZ Trion 150 480 GB SSD". This resulted in the error, "Windows cannot install required files.
Make sure all the files required for installation are available, and restart the installation. Error Code: 0x8007025D". After reading many FORUMS, this one included and trying all the various suggestions, nothing worked! I borrowed my son's Kingston Hyper
X 250 (125 GB SSD), and ran a successful installation with no errors. This PROVED that my installation media which I created using Microsoft's media creation tool was just FINE. It also proved that nothing was wrong with my hardware. I suspected that maybe
it was a bad SSD that I had. So I went out and bought a brand new "Corsair Force LE 480GB SSD". I ran an installation, this resulted in the error, "Windows cannot install required files. Make sure all the files required for installation are available, and
restart the installation. Error Code: 0x8007025D". So could I possibly have TWO BAD SSD units? No, not at all... I remembered that my son's SSD was a small volume 125GB drive. So on a hunch I did the following: So I placed my SSD (Corsair) in an external enclosure,
connected it to my laptop, formatted (not Quick Format, but Full Format). I then created two partitions, Vol1 (125GB - primary) and Vol2 (355GB). I then opened DISKPART and did a CLEAN and then I CONVERTED the volume to MBR from GPT. Next I mounted the SSD
back in to my PC. I Reset my BIOS to Factory Defaults just to be safe. I Ran the installation on the 125GB partition. WINDOWS 10 installed just fine. So this means that neither of my SSDs were bad, it means Windows 10 FREAKS OUT when installing fresh on large
volume SSDs. Possibly anything over 250 GB. Good luck! FYI... How to do DISKPART 1. Type Diskpart, press Enter 2. Type List Disk , press Enter 3. Type Select Disk # (where # is the number your drive shows up as), press Enter 4. Type Clean, press Enter 5. Type
Convert MBR, press Enter 6. Type Exit, press Enter.
SOLUTION by Anthony from www.ghosthunterapps.com