Windows 10: Error de conexión HUENEME - NEGEV en PC Battlenet

Estoy en mí pc, usando la plataforma de Battlenet, mí pc está conectada directamente con ethernet, no tiene capacidad de conectarse por wifi por qué placa de wifi o no tiene antena. Ya trate de verificar la integridad de los archivos, verifique la actualización del juego, borre la carpeta de datos del call of duty, cambie los DNS por 8.8.8.8 - 8.8.4.4 y sigue igual

:)

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

Network PC Win10 1903 issue Error Code 0x80070035

i followed these steps, but no matter what, i couldnt stop network list services.

"windows could not stop the network list service on local computer. error 1061: the service cannot accept control messages at this time".

also, which pc am i meant to be running this fix on? both PC's reported error 1061.

 

PC Build Steps

Ok just because I like steps i am going to create some steps. Please give me the stamp of approval/disapproval

• Install system in case
  • Remember to connect SSD and optical to same SATA ports on motherboard
• Turn on PC
• setup HDD
• run blend test in prime95 for 30-60 min
  • run realtemp at the same time

• While in Prime95 test
  • if CPU goes above 70c in RealTemp, I have a leaky CPU
  • if my system locks up or blue screens, there is an instability in the system somewhere
  • if my system does not lock up or blue screen, my CPU is not damaged and I am in the clear!

What do you guys think??